Electronic Components Datasheet Search |
|
PLDM4-2.6 Datasheet(PDF) 1 Page - Rhombus Industries Inc. |
|
PLDM4-2.6 Datasheet(HTML) 1 Page - Rhombus Industries Inc. |
|
1 / 1 page www.rhombus-ind.com TEL: (714) 898-0960 sales@rhombus-ind.com FAX: (714) 896-0971 6SHFLILFDWLRQV VXEMHFW WR FKDQJH ZLWKRXW QRWLFH )RU RWKHU YDOXHV&XVWRP 'HVLJQV FRQWDFW IDFWRU\ UKRPEXV LQGXVWULHV LQF PLDM4-G 2001-01 FAST/TTL 3-Bit Schematic 5 7 Vcc OUT 8 16 10 9 E P1 GND P3 P2 Output Buffer 11 4 IN Delay Line 3-Bit Programmable 3-Bit Programmable Delay Modules PLDM4 Series FAST/TTL Logic 7 Delay Steps -- 4 ns Inherent Delay Available in Surface Mount 24 Electrical Specifications at 25OC 3-Bit FAST Part Number Delay per Step (ns) Error ref. to 000 (ns) Initial Delay (ns) Referenced to "000" - Delay (ns) per Program Setting (P3*P2*P1) 000 000 001 010 011 100 101 110 111 PLDM4-0.5 0.5 ± .25 ± .30 4 ± 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 PLDM4-0.7 0.7 ± .30 ± .40 4 ± 1.0 0.0 0.7 1.4 2.1 2.8 3.5 4.2 4.9 PLDM4-0.8 0.8 ± .30 ± .50 4 ± 1.0 0.0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 PLDM4-1 1.0 ± .4 ± .50 4 ± 1.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 PLDM4-1.2 1.2 ± .4 ± .60 4 ± 1.0 0.0 1.2 2.4 3.6 4.8 6.0 7.2 8.4 PLDM4-1.25 1.25 ± .5 ± .70 4 ± 1.0 0.0 1.25 2.50 3.75 5.00 6.25 7.50 8.75 PLDM4-1.3 1.3 ± .5 ± .70 4 ± 1.0 0.0 1.3 2.6 3.9 5.2 6.5 7.8 9.1 PLDM4-1.5 1.5 ± .5 ± .70 4 ± 1.0 0.0 1.5 3.0 4.5 6.0 7.5 9.0 10.5 PLDM4-1.8 1.8 ± .6 ± .80 4 ± 1.0 0.0 1.8 3.6 5.4 7.2 9.0 10.8 12.6 PLDM4-2 2.0 ± .7 ± .80 4 ± 1.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 PLDM4-2.5 2.5 ± .7 ± .90 4 ± 1.0 0.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 PLDM4-2.6 2.6 ± .7 ± .90 4 ± 1.0 0.0 2.6 5.2 7.8 10.4 13.0 15.6 18.2 PLDM4-3 3.0 ± .7 ± 1.0 4 ± 1.0 0.0 3.0 6.0 9.0 12.0 15.0 18.0 21.0 CUMULATIVE TOLERANCES: "Error" Tolerance is for Programmed Delays referenced to Initial Delay, Setting "000." For example, the setting "111" delay of PLDM4-10 is 70.0 ± 3.0ns ref. to "000," and 74.0 ± 4.0ns referenced to the input. _ ENABLE input (Pin 7) is active low. Output will be disabled ( low) when " E " is high. 16-Pin SMD Pkg. Unused leads are NOT removed. To Specify SMD Package, Add "G" Suffix to P/N Examples: PLDM4-1.25G, PLDM4-2G .100 (2.54) TYP. .040 (1.02) TYP. .020 (0.51) TYP. .510 (12.95) .480 (12.19) .025 (0.64) .400 (10.16) 1.02 (25.9) MAX. .010 (0.25) TYP. .285 (7.24) MAX. .015 (0.38) INPUT FAN-IN: Input, pin 4, is loaded by the internal passive network and 8 gate inputs (74F type). The source driving Pin 4 should be FAST/TTL (74S/74F) type or equivalent, and should not be used to drive any load other than the delay line input. TEST CONDITIONS -- FAST / TTL V CC Supply Voltage ............................................... 5.00VDC Input Pulse Voltage ................................................... 3.20V Input Pulse Rise Time ....................................... 3.0 ns max. Input Pulse Width / Period ........................... 1000 / 2000 ns 1. Measurements made at 25OC 2. Delay Times measured at 1.50V level of leading edge. 3. Rise Times measured from 0.75V to 2.40V. 4. 10pf probe and fixture load on output. Dimensions in Inches (mm) MAX. .260 (6.60) TYP. .810 (20.57) .300 (7.62) MAX. .100 (2.54) TYP. .050 (1.27) TYP. .020 (0.51) TYP. .120 (3.05) MIN. .300 (7.62) .400 (10.16) MAX. .010 (0.25) TYP. OPERATING SPECIFICATIONS V CC Supply Voltage ................................... 5.00 ± 0.25 VDC I CC Supply Current .......................... 60 mA typ., 80 mA max Logic “1” Input *: V IH ..................... 2.00 V min., 5.50 V max. I IH ............................... 50 µA max. @ 2.70V Logic “0” Input *: V IL ....................................... 0.80 V max. I IL ............................................ -0.6 mA mA V OH Logic “1” Voltage Out ................................... 2.40 V min. V OL Logic “0” Voltage Out ................................ 0.50 V max. P WI Input Pulse Width ............................. 40% of Delay min. Operating Temperature Range ......................... -0O to +70OC Storage Temperature Range ...................... -65O to +150OC * Refer to "INPUT FAN-IN" note above. IIL/IIH specified for Programming pins 9, 10 & 11. |
Similar Part No. - PLDM4-2.6 |
|
Similar Description - PLDM4-2.6 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |