Electronic Components Datasheet Search |
|
B224RB Datasheet(PDF) 2 Page - Gamewell-FCI by Honeywell |
|
B224RB Datasheet(HTML) 2 Page - Gamewell-FCI by Honeywell |
2 / 2 page INSTALLATION Place the sensor into the sensor base. Turn the sensor clockwise until the sensor locks into place. To use the tamper-proof feature, break the smaller tab on the base as shown in the installation instructions. In- stall the sensor. To remove the sensor from the base when using the tamper-proof feature, insert the blade of a small screwdriver into the hole on the side of the base and push the plastic lever away from the detector head. This will allow the sensor to be rotated counterclock- wise for removal. NOTE: The decorative ring must be removed in order to remove the head when using the tamper-proof feature. Refer to NFPA 72, Chapter 5-3 “Smoke Sensing Fire Detectors” for spacing, location of sensors and other guidelines. TESTING Sensors may be tested locally in the following ways: • A. Place a test magnet against the sensor housing per the instructions. The sensor should go into alarm within 30 seconds. • B. Aerosol Generator - The Gemini Model 501 aerosol generator may be used to perform a functional test. This test should be performed immediately following the magnet test. Magnet test initiates an approximately ten minute period when the detector's signal processing software routines are not active. Failure to first perform the magnet test will introduce a time delay before the detector alarms. Follow instructions in the generator instruction manual. MAINTENANCE Cleaning programs should be adapted to the individ- ual environment in conformance with the National Fire Alarm Code, NFPA 72. We recommend, at the least, an annual cleaning of the unit. The sensor screen and cover assembly can be removed, revealing the sensing cham- ber. A vacuum cleaner can be used to remove dust from the screen, cover and sensing chamber. For the com- plete procedure, refer to the Installation and Mainte- nance Instructions furnished with each sensor. 2of2 9020-0525Rev. B ORDERING INFORMATION Part No. Model Description 110-90039 ASD-LS Low Profile Analog Laser Sensor 110-90005 ADB-FL Standard plug-in sensor base with flange and decorative ring 110-90004 B224RB Plug-in sensor base with auxiliary relay, SPDT, rated 2 amps. @ 30 VDC (resistive) 110-90006 B224BI Plug-in sensor isolator base for Style 7 operation 130-90037 B501BHT Plug-in sensor base with temporal pattern sounder 110-31A60 B501 Plug-in sensor base w/o flange 138-01005 RA-400Z Remote alarm indicator 119-9010N Detector sensitivity test kit. AGENCY APPROVALS UL (Std 268) S1913 Factory Mutual Pending |
Similar Part No. - B224RB |
|
Similar Description - B224RB |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |