I/Q Mixer / Modulator

Communications Band

LO (GHz)

1.4-2.8

1.4-1.7

1.7-2.8

1.4-2.8

1.4-2.8

1.4-2.8

1.4-2.8

1.4-2.8

1.4-2.8

1.4-2.8

RF (GHz)

1.4-2.8

1.4-1.7

1.7-2.8

1.4-2.8

1.4-2.8

1.4-2.8

1.4-2.8

1.4-2.8

1.4-2.8

IF (MHz)

DC-500

DC-500

DC-500

DC-500

DC-500

DC-500

DC-500

DC-500

DC-500

Min

18 dB

20 dB

34 dB

20 dB

Typical

6.0 dB

22 dB

30 dB

0.2 dB

3 deg

42 dB

40 dB

30 dB

45 dB

+6 dBm

+9 dBm

+13 dBm

+14 dBm

+17 dBm

+21 dBm

+10 dBm

+13 dBm

+17 dBm

Max

8.0 dB

MIQ24

MIQ26

MIQ27

MIQ24

MIQ26

MIQ27

MIQ24

MIQ26

MIQ27

Conditions

:

Parameter

SSB Conversion

Image Rejection Side-

Amplitude Match

Phase Match

Isolation

LO to RF:

LO to I/Q:

RF to I/Q:

I/Q to RF:

Input 1 dB

Compression Point:

Input Third Order

Intercept Point:

Model MIQ2xMS-1

RF 1.4 to 2.8 GHz

Notes:

1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed.

2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz.

3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. Conversion loss is the combined value.

4. Measured with an IF quadrature hybrid whose amplitude and phase errors are 0.5 dB and 3 degrees maximum. An IF quadrature hybrid is not included.

5. Usable LO drives are up to 2 dB below to 3 dB above nominal.

6. See Application notes M112, for aid in selecting the outline and for mounting and installation information.

Typical Performance at 25˚C

LO Power

4 = +10 dBm

6 = +13 dBm

7 = +17 dBm

All dimensions are in inches and [mm].

Outline: MSQ6

MIQ2xMS-1

Model MIQ2xMS-1

Specifications

Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532

Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001

www.SpectrumMicrowave.com