3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com

®

MKP

Class X2

Radial Lead Metallized

Polypropylene Capacitors

Voltage Impulse Test

±10% at 1kHz, 25°C

Capacitance Tolerance

-40°C to +110°C

Humidity Test

Load Life

Voltage Range

50-60Hz

VAC

Dissipation Factor

0.1% at 1 kHz, 20°C

Capacitance

Terminal to Terminal

Terminal to Case

≤0.33 µF

15,000M

Ω at 100VDC

>30,000 M

Ω at 100VDC

>500M

Ω at 500VDC

>0.33 µF

5,000 M

Ω x µF at 100VDC

>30,000 M

Ω at 100VDC

>500M

Ω at 500VDC

1000 hours at+110°C with 125% of rated voltage with the voltage increased to

1000Vrms for 0.1 seconds every hour.

<5% maximum of initial measured value

<0.15% at 1kHz

Capacitance Change

Dissipation Factor

Insulation Resistance

<5% of initial measured value

<0.15% at 1kHz

Self-inductance

Dielectric Strength

≤1 nH/mm along the capacitor pitch and lead length

Capacitance Drift Factor

Capacitance Temperature

Coefficient

<1 nH/mm along the capacitor pitch and lead length

-200 ppm/°C, ± 100ppm/°C

Construction

Dielectric

Electrodes

Leads

Wound, Extended metallized film

Polypropylene film

Vacuum deposited zinc layers

Tinned copper wire (lead free)

Coating

Solvent resistant box with flame

retardant epoxy sealed resin (UL 94V-O)

Terminal to Terminal

310 (UL, CSA)

275 (IEC 60384-14)

Operating Temperature Range

Terminal to Case

2050VAC applied for 1 minute.

Insulation Resistance

Capacitance Change

Dissipation Factor

Insulation

Resistance

Capacitance

≤0.33uF

>0.33uF

3000 M

Ω

Terminal to Terminal

7500 M

Ω Minimum at 100VDC

2500 M

ΩxuF Minimum at 100VDC

Terminal to Case

500 hours at 90 to 95% RH, 40°C and no voltage applied after which the following voltage

shall be applied for 1minute to each capacitor

C

≤0.0068uF 1500VAC, C>0.0068uF 1075VDC

Capacitance

≤0.33uF

>0.33uF

Terminal to Case

Terminal to Terminal

7500 M

Ω Minimum at 100VDC

2500 M

ΩxuF Minimum at 100VDC

15000 M

Ω at 100 VDC

C

≤0.0068uF 1500Vac or 2121 Vdc for 1 minute

C>0.0068uF 1000Vac or 1768 Vdc for 1 minute

Cut-off current: 2Aac or 10mAdc

Current limiting resistance: 1

Ω/V

24 pulses

C

≤ 1.0uF Vp=2.5kVDC

C>1.0uF Vp=2.5kV/

√C