5

2600-TE SERIES

Ordering Information

For more information on this or other products and their availability, please contact your local JDSU account manager or

JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at

customer.service@jdsu.com.

Sample: 26-7402-100-TE

User Safety

Safety and Operating Considerations

The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the

fiber when the device is in operation.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.

Operating the laser diode outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with

this component cannot exceed maximum peak optical power.

CW laser diodes may be damaged by excessive drive current or switching transients. When using power supplies, the laser

diode should be connected with the main power on and the output voltage at zero. The current should be increased slowly

while monitoring the laser diode output power and the drive current. Careful attention to heatsinking and proper mounting

of this device is required to ensure specified performance over its operating life. To maximize thermal transfer to the heatsink,

the heatsink mounting surface must be flat to within .001” and the mounting screws must be torqued down to 1.5 in.-lb.

ESD PROTECTION — Electrostatic discharge (ESD) is the primary cause of unexpected laser diode failure. Take extreme

precaution to prevent ESD. Use wrist straps, grounded work surfaces, and rigorous antistatic techniques when handling laser diodes.

Code

Minimum Kink-Free Power

100

100 mW

110

110 mW

120

120 mW

130

130 mW

140

140 mW

150

150 mW

160

160 mW

170

170 mW

180

180 mW

Code

Peak Wavelength

7402

973.0 to 975.0 nm

7552

974.5 to 976.5 nm

7602

975.0 to 977.0 nm

7702

976.0 to 978.0 nm

8000

970.0 to 985.0 nm

8052

979.5 to 981.5 nm

26-

-

-TE