Electronic Components Datasheet Search |
|
HAE100-12S48 Datasheet(PDF) 1 Page - Power Mate Technology Co., LTD |
|
HAE100-12S48 Datasheet(HTML) 1 Page - Power Mate Technology Co., LTD |
1 / 5 page Page 1 of 5 Issued Date:2009/01/13 GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output (Basic insulation) Input (Output) to Case 2250VDC, min. 1600VDC, min. Isolation resistance 109ohms, min. Isolation capacitance 2500pF, max. Switching frequency 300KHz, typ. Design meet safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Metal Base material FR4 PCB Potting material Silicon (UL94-V0) Dimensions 2.40 X 2.28 X 0.50 Inches (61.0×57.9×12.7 mm) Weight 97g (3.42oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 1.010 x 106 hrs 7.416 x 104 hrs ENVIRONMENTAL SPECIFICATIONS Without Heat-sink -40℃ ~ +35℃ +35℃ ~ +77℃ (without derating) (with derating) Operating ambient temperature (Note10) (For 3.3,5,12,15Vout) With Heat-sink (0.24” Height) -40℃ ~ +50℃ +50℃ ~ +82℃ (without derating) (with derating) Without Heat-sink -40℃ ~ +30℃ +30℃ ~ +81℃ (without derating) (with derating) Operating ambient temperature (Note10) (For 24,28,48Vout) With Heat-sink (0.24” Height) -40℃ ~ +44℃ +44℃ ~ +85℃ (without derating) (with derating) Maximum case temperature 105℃ Over temperature protection 115℃ Storage temperature range -55℃ to +125℃ Thermal impedance (Note 11) without Heat-sink with 0.24" Height Heat-sink with 0.45" Height Heat-sink 6.7 /watt ℃ 5.4 /watt ℃ 4.7 /watt ℃ Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS (Note 12) EMI EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transien EN61000-4-4 ± 2KV Perf. Criteria A Surge EN61000-4-5 ± 1KV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A OUTPUT SPECIFICATIONS Output power 100Watts, max. Voltage accuracy Full load and Vin, nom ±1% Voltage adjustability (Note 7) +10%, -20% Minimum load 0% Line regulation LL to HL at FL See table Load regulation No Load to Full Load See table Remote sense (Note 8) 10% of Vout, nom Ripple and noise 20MHz bandwidth See table Temperature coefficient ±0.02%/ ℃, max. Transient response recovery time 25% load step change 200μS Over voltage protection threshold (Hiccup) 115% ~ 130% of Vout, nom Over current protection threshold 110% ~ 140% of Iout Rated Short circuit protection Hiccup, automatics recovery INPUT SPECIFICATIONS Input voltage range 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Start-up voltage 12V nominal input 24V nominal input 48V nominal input 8.5VDC 17.5VDC 35.5VDC Shutdown voltage 12V nominal input 24V nominal input 48V nominal input 7.5VDC 16VDC 34VDC Input filter Pi type Input surge voltage 100mS max 12V nominal input 24V nominal input 48V nominal input 36VDC 50VDC 100VDC Input reverse protection (Note 9) Parallel diode Start up time Vin, nom and constant resistive load Power up Remote ON/OFF 25mS, typ. 25mS, typ. Remote ON/OFF (Note 6) (Negative logic) (Standard) (Positive logic) (Option) Input current of Remote control pin Remote off input current DC-DC ON DC-DC OFF DC-DC ON DC-DC OFF Vin(nom) Vin(nom) Short or 0V < Vr < 1.2V Open or 3V < Vr < 12V Open or 3V < Vr < 12V Short or 0V < Vr < 1.2V -0.5mA ~ 1mA 3mA TECHNICAL SPECI F ICA T ION All specifications are typical at nominal input, full load and 25℃ otherwise noted FEATURES OUTPUT CURRENT UP TO 25A 2:1 WIDE INPUT VOLTAGE RANGE HIGH EFFICIENCY UP TO 93% NO MINIMUM LOAD SOFT-START ADJUSTABLE OUTPUT VOLTAGE UNDER-VOLTAGE LOCKOUT • INPUT REVERSE PROTECTION • INDUSTRY STANDARD HALF-BRICK FOOTPRINT • SIX-SIDED CONTINUOUS SHIELD • INPUT TO OUTPUT BASIC INSULATION • BUS TERMINAL BLOCK OPTION OPTIONS Positive logic remote ON/OFF Terminal block Terminal block with EMC filter Pin length Heat-sink DESCRIPTION HAE100-SERIES DC/DC converters provide up to 100 watts of output power in an industry standard half-brick package and footprint. All models feature a wide input range and adjustable output voltage. APPLICATIONS Wireless Network Telecom/ Datacom Industry Control System Distributed Power Architectures Semiconductor Equipment Standard Terminal Block |
Similar Part No. - HAE100-12S48 |
|
Similar Description - HAE100-12S48 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |