-53-

H HiTRON

AC/DC EXTERNAL REGULATED WALLMOUNT & DESKTOP

ADAPTER DIVERSE AC PLUGS SINGLE OUTPUT 6.0-13.0 WATTS

LINEAR POWER SUPPLIES HER-48 SERIES

FEATURES:

COST EFFECTIVE ADAPTORS

WORLDWIDE DIVERSE AC PLUGS

MEET USA OR EUROPEAN STANDARD

LOW NOISE MEET EMI REQUIREMENTS

CE MARKING COMPLIANCE

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: Nominal 100/110/120Vac, range -10% to

+6% or 220/230/240Vac, range -10% to

+10%. Custom Vac available.

Input Connector:

Wallmount Format: WM1,2(USA/Japan)/ WM3

(Euro-stecker) / WM4 (Schuko-stecker)/

WM5 (UK)/ WM6, 6G(Australia).

Desktop Format: PT1,2,3,4,5,6,

Input Frequency: 60Hz.for nominal 100/110/120Vac.

50Hz.for nominal 220/230/240Vac.

Input Current: 0.25A max. @100-120Vac/60Hz.

0.15A max. @220-240Vac/50Hz.

Dielectric Withstand: Meet IEC 60950.

EMI: Meet EN 55022 / FCC Class B.

Thermal Protection: Thermal fuse installed in the

input transformer.

GENERAL SPECIFICATION

Efficiency: Various with output voltage.

Typical 28.0-40.0% @100~120Vac/60Hz input.

Typical 20.0-30.0% @220~240Vac/50Hz input.

Circuit Topology: Line frequency lamination

steel transformer circuit.

Transient Response: Less than 50µS following

a 25% load change.

Operating Temperature: 0 to +25/35/40°C

without derating. (various with output voltage)

Storage Temperature: -20°C to +85°C.

Cooling: Free air convection.

Construction: Impact resistant plastic enclosure case.

Safety Standard: Meet UL1950/CSA C22.2 NO.950/

EN60950 Class I & II.

Wallmount & Desktop Format in EI-48 case.

NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.

(2) Due to requests in market and advances in technology, specifications subject to change without notice.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Wattage: 8.5-13Watts typical @120Vac/60Hz input.

6.0-9.6 Watts typical @220-240Vac/50Hz input.

Output Connector: Optional.

Load Regulation: ±5.0% typical at end of 6ft. cord

AWG#20 wires.

(The exactly voltage regulation obtainable

depends upon the output cord & connector

selected and load current.)

Noise & Ripple: Less than 20mV.

Overload Protection: Protected by thermal fuse

buried inside the transformer.

Hold-up Time: Less than 1mS at nominal input and

typical load.

For the details of safety approval, please consult the factory.