Electronic Components Datasheet Search |
|
PQ60010QPA60NYS Datasheet(PDF) 2 Page - SynQor Worldwide Headquarters |
|
PQ60010QPA60NYS Datasheet(HTML) 2 Page - SynQor Worldwide Headquarters |
2 / 13 page Product # PQ60010QPA60 Phone 1-888-567-9596 www.synqor.com Doc.# 005-2QP610F Rev. D 9/21/07 Page 2 T Technical S echnical Specification pecification Input: Input: Output: Output: Current: Current: PPackage: ackage: 35-75 V 35-75 V 1.0 V 1.0 V 60 A 60 A Quarter-brick Quarter-brick Pin No. Name Function 1 Vin(+) Positive input voltage 2 ON/OFF TTL input to turn converter on and off, referenced to Vin(-), with internal pull up. 3 Vin(-) Negative input voltage 4 Vout(+) Positive output voltage 5 Vout(-) Negative output voltage 6 SENSE(-) Negative remote sense1 7 TRIM Output voltage trim2 8 SENSE(+) Positive remote sense3 9 Vout(+) Positive output voltage 10 Vout(-) Negative output voltage Pins in Italics Shaded text are Optional Notes: 1. SENSE(-) may be connected to Vout(-) either remotely or at the converter. 2. Leave TRIM pin open for nominal output voltage. 3. SENSE(+) may be connected to Vout(+) either remotely or at the converter. NOTES 1) Pins 1-3, 6-8 are 0.040” (1.02mm) diameter with 0.080” (2.03 mm) diameter standoff shoulders. 2) Pins 4-5, 9-10 are 0.062” (1.57 mm) diameter with 0.100” (2.54 mm) diameter standoff shoulders. 3) Other pin extension lengths available. Recommended pin length is 0.03” (0.76mm) greater than the PCB thickness. 4) All Pins: Material - Copper Alloy Finish (RoHS 5/6) - Tin/Lead over Nickel plate Finish (RoHS 6/6) - Matte Tin over Nickel plate 5) Undimensioned components are shown for visual reference only. 6) All dimensions in inches (mm) Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm) 7) Weight: 1.5 oz. (42 g) typical 8) Workmanship: Meets or exceeds IPC-A-610C Class II 9) UL/TUV standards require a clearance greater than 0.04” (1.02mm) between input and output for Basic insulation. This issue should be considered if any copper traces are on the top side of the user’s board. Note that the ferrite cores are considered part of the input/primary circuit. 10) The flanged pins are designed to permit surface mount soldering (allowing to avoid the wave soldering process) through the use of the flanged pin-in-paste technique. 0.300 (7.62) 0.600 (15.24) 1.45 (36.8) 0.425 (10.8) 0.150 (3.81) 0.300 (7.62) 0.450 (11.43) 0.600 (15.24) 0.750 (19.05) 0.900 (22.86) 0.14 (3.6) 2.30 (58.4) 2.00 (50.8) Top View Side View PIN DESIGNATIONS MECHANICAL DIAGRAM Load Board Bottom side Clearance See Note 9 Lowest Component 0.45 (11.4) 0.056 +.032 (1.42 +.81) 0.145 (3.68) See Note 3 Flanged Pin See Note 10 |
Similar Part No. - PQ60010QPA60NYS |
|
Similar Description - PQ60010QPA60NYS |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |