Dual Delta-Sigma Modulator and Encoder

4

_______________________________________________________________________________________

Pin Description

PIN

NAME

FUNCTION

1

DGND

Digital Ground

2

AGND

Analog Ground

3

Reference Voltage Input/Output. When APDREF = 0, the buffered internal voltage reference is driven on

this pin as an output and can be used by other devices. When APDREF = 1, an external voltage

reference must be provided on this pin.

4

AN1-

Negative Input for Differential Analog Input Channel 1

5

AN1+

Positive Input for Differential Analog Input Channel 1

6

AN0-

Negative Input for Differential Analog Input Channel 0

7

AN0+

Positive Input for Differential Analog Input Channel 0

8, 16

Digital and Analog Power Supply

9

CLKSEL

Clock Select Input. When CLKSEL = 0, the DS8102 uses its internal 8MHz oscillator as a clock source.

When CLKSEL = 1, the DS8102 operates from an external clock source (which must be provided at

CLKIO).

10

G0

Gain Select Input 0. This pin, along with G1, is used to select the gain setting for differential analog

input channel 0.

11

G1

Gain Select Input 1. This pin, along with G0, is used to select the gain setting for differential analog

input channel 0.

12

CLKIO

Clock Input/Output. When CLKSEL = 0 (internal clock selected), the internal 8MHz clock is output on

this pin and can be used by external devices. When CLKSEL = 1 (external clock selected), an external

clock must be provided on this pin.

13

MNOUT

Manchester Encoder Output. This output pin provides a Manchester-encoded bit stream containing

output bits from both modulators interleaved with an alternating synchronization bit.

14

RST

Reset. This input pin can be used to force the DS8102 into a shutdown (low-power) state by driving

operation. An RC circuit is not required on this pin for power-up, as this function is provided internally.

15

APDREF

Analog Power-Down Reference. This input pin controls whether the internal voltage reference is

enabled. If APDREF = 0, the internal voltage reference is enabled and the voltage reference level is