Electronic Components Datasheet Search |
|
MAAL-007673 Datasheet(PDF) 2 Page - M/A-COM Technology Solutions, Inc. |
|
MAAL-007673 Datasheet(HTML) 2 Page - M/A-COM Technology Solutions, Inc. |
2 / 4 page • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 Low Noise Amplifier 1.7 - 2.0 GHz Rev. V2 MAAL-007673 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications 6: T A = 25°C, VDD = +5 V, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Gain 1.7 - 2.0 GHz, PIN = -30 dBm dB 18 20 22 Noise Figure 1.7 - 2.0 GHz dB — 1.65 2.00 Input VSWR 1.7 - 2.0 GHz, PIN = -30 dBm Ratio — 1.7:1 — Output VSWR 1.7 - 2.0 GHz, PIN = -30 dBm Ratio — 1.7:1 — Output 1 dB Compression 1.7 - 2.0 GHz dBm — 7 — Input IP3 1.7 - 2.0 GHz, PIN = -30 dBm dBm — -1 — Reverse Isolation 1.7 - 2.0 GHz, PIN = -30 dBm dB — 38 — Bias Current — mA 5 8 11 6. See plots for 3-volt performance. Component List Part Value Case Size Manufacturer C1 500 pF 0603 Murata L1 15 nH 0805 Coilcraft R1 (Optional) 35 to 40 Ω 0603 Panasonic 7. Pins 1, 4, 5 and 8 must be RF and DC grounded as shown. 8. Pin 3 is the RF input, pin 6 is the RF output. VDD is applied on pin 7. This pin must be bypassed with a 500 pF surface mount MLC capacitor, mounted as close as possible to pin 7, and RF decoupled with a chip inductor having a minimum value of 15 nH (as shown in the Recommended PCB Configuration). 9. Pin 2 allows use of an external resistor to ground for optional, higher current bias. For nominal current operation no resistor is used. For optional 20 mA current operation, connect a 35 to 40 ohm chip resistor (as show in the Recommended PCB Configuration). Recommended PCB Configuration Application Schematic 7,8,9 L1 C1 VDD RF IN RF OUT R1 (Optional) See Note 9 |
Similar Part No. - MAAL-007673 |
|
Similar Description - MAAL-007673 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |