24VL024T datasheet(7/30 Pages) MICROCHIP

Part #	24VL024T

Description	2K I2C??Serial EEPROM

Download	30 Pages

Scroll/Zoom	100%

Manufacturer	MICROCHIP [Microchip Technology]

Direct Link	http://www.microchip.com

Logo

7 / 30 page

DS22130A-page 7

24VL024/24VL025

4.0

BUS CHARACTERISTICS

The following bus protocol has been defined:

• Data transfer may be initiated only when the bus

is not busy.

• During data transfer, the data line must remain

stable whenever the clock line is high. Changes in

the data line while the clock line is high will be

interpreted as a Start or Stop condition.

Accordingly, the following bus conditions have been

defined (Figure 4-1).

4.1

Bus Not Busy (A)

Both data and clock lines remain high.

4.2

Start Data Transfer (B)

A high-to-low transition of the SDA line while the clock

(SCL) is high determines a Start condition. All

commands must be preceded by a Start condition.

4.3

Stop Data Transfer (C)

A low-to-high transition of the SDA line while the clock

(SCL) is high determines a Stop condition. All

operations must be ended with a Stop condition.

4.4

Data Valid (D)

The state of the data line represents valid data when,

after a Start condition, the data line is stable for the

duration of the high period of the clock signal.

The data on the line must be changed during the low

period of the clock signal. There is one bit of data per

clock pulse.

Each data transfer is initiated with a Start condition and

terminated with a Stop condition. The number of the

data bytes transferred between the Start and Stop

conditions is determined by the master device and is,

theoretically, unlimited, though only the last sixteen will

be stored when doing a write operation. When an

overwrite does occur, it will replace data in a first-in

first-out fashion.

4.5

Acknowledge

Each receiving device, when addressed, is required to

generate an acknowledge after the reception of each

byte. The master device must generate an extra clock

pulse which is associated with this Acknowledge bit.

The device that acknowledges has to pull down the

SDA line during the Acknowledge clock pulse in such a

way that the SDA line is stable low during the high

period of the acknowledge-related clock pulse. Of

course, setup and hold times must be taken into

account. A master must signal an end of data to the

slave by not generating an Acknowledge bit on the last

byte that has been clocked out of the slave. In this case,

the slave must leave the data line high to enable the

master to generate the Stop condition (Figure 4-2).

FIGURE 4-1:

DATA TRANSFER SEQUENCE ON THE SERIAL BUS CHARACTERISTICS

FIGURE 4-2:

ACKNOWLEDGE TIMING

Note:

The 24VL024/24VL025 does not generate

any Acknowledge bits

if an internal

programming cycle is in progress.

(A)

(B)

(C)

(D)

(A)

(C)

SCL

SDA

Start

Condition

Address or

Acknowledge

Valid

Data

Allowed

to Change

Stop

Condition

SCL

9

8

7

6

5

4

3

2

1

123

Transmitter must release the SDA line at this point allowing

the Receiver to pull the SDA line low to acknowledge the

previous eight bits of data.

Receiver must release the SDA line at this

point so the Transmitter can continue

sending data.

SDA

Acknowledge

Bit

Data from transmitter

Similar Part No. - 24VL024T

Manufacturer	Part #	Datasheet	Description
Microchip Technology	24VL024H	466Kb / 28P	2K I2C??Serial EEPROM with Half-Array Write-Protect 2008
	24VL024H/MNY	466Kb / 28P	2K I2C??Serial EEPROM with Half-Array Write-Protect 2008
	24VL024H/MS	466Kb / 28P	2K I2C??Serial EEPROM with Half-Array Write-Protect 2008
	24VL024H/P	466Kb / 28P	2K I2C??Serial EEPROM with Half-Array Write-Protect 2008
	24VL024H/SN	466Kb / 28P	2K I2C??Serial EEPROM with Half-Array Write-Protect 2008

More results

Similar Description - 24VL024T

Manufacturer	Part #	Datasheet	Description
Microchip Technology	24AA02	401Kb / 26P	2K I2C??Serial EEPROM 2007
	24AA02	605Kb / 32P	2K I2C??Serial EEPROM 2009
	24LC02B-I	411Kb / 26P	2K I2C Serial EEPROM 12/08/06
	24LC02BT-SN	605Kb / 32P	2K I2C??Serial EEPROM 2009
	24AA024	522Kb / 30P	2K I2C??Serial EEPROM 2009
	24AA02	337Kb / 24P	2K I2C Serial EEPROM 2003
	24LC02B-I-SN	605Kb / 32P	2K I2C??Serial EEPROM 2009
	24LC024-IP	538Kb / 30P	2K I2C??Serial EEPROM 2009
	24LC02B	324Kb / 26P	2K I2C Serial EEPROM 12/08/06
	24LC024-I	555Kb / 30P	2K I2C Serial EEPROM 01/02/08

More results

24VL024T Datasheet(PDF) 7 Page - Microchip Technology

24VL024T Datasheet(HTML) 7 Page - Microchip Technology

Similar Part No. - 24VL024T

Similar Description - 24VL024T

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Datasheet Download

Link URL