© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
SMT Power Inductors - LPO2506 Series
Document 208-1
Document 208-1
Revised 10/14/08
InBoard style
On-board style
L ±20%2
DCR max
SRF typ
Isat3
Irms4
part number1
part number1
(µH)
(Ohms)
(MHz)
(A)
(A)
LPO2506I-472L_
LPO2506O-472L_
4.7
0.145
90
1.6
1.9
LPO2506I-682L_
LPO2506O-682L_
6.8
0.165
75
1.3
1.7
LPO2506I-822L_
LPO2506O-822L_
8.2
0.200
65
1.0
1.5
LPO2506I-103L_
LPO2506O-103L_
10
0.240
60
1.0
1.5
LPO2506I-153L_
LPO2506O-153L_
15
0.300
45
0.90
1.3
LPO2506I-223L_
LPO2506O-223L_
22
0.420
35
0.70
1.0
LPO2506I-333L_
LPO2506O-333L_
33
0.550
30
0.60
0.90
LPO2506I-473L_
LPO2506O-473L_
47
0.765
22
0.50
0.70
LPO2506I-683L_
LPO2506O-683L_
68
1.10
20
0.40
0.60
LPO2506I-104L_
LPO2506O-104L_
100
1.60
15
0.30
0.50
LPO2506I-154L_
LPO2506O-154L_
150
2.50
12
0.25
0.40
LPO2506I-224L_
LPO2506O-224L_
220
3.65
10
0.22
0.32
LPO2506I-334L_
LPO2506O-334L_
330
4.65
8.0
0.18
0.28
LPO2506I-474L_
LPO2506O-474L_
470
6.75
6.5
0.14
0.24
LPO2506I-684L_
LPO2506O-684L_
680
9.15
5.5
0.12
0.20
LPO2506I-105L_
LPO2506O-105L_
1000
14.20
4.5
0.10
0.16
1. When ordering, please specify termination and packaging codes:
LPO2506O-105
LD
Termination: L = RoHS compliant silver-palladium-platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging:
D =13
″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
4263B LCR meter or equivalent.
3. DC current at which the inductance drops 10% (typ) from its value
without current.
4. Current that causes a 40°C temperature rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C332 contains 3 of all InBoard® styles
Designer’s Kit C333 contains 3 of all On-board styles
Core material Ferrite
Core and winding loss
See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 240 – 260 mg
Ambient temperature –40°C to +85°C with
Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/13
″ reel Plastic tape: 12 mm wide, 0.23 mm thick,
8 mm pocket spacing, 1.37 mm pocket depth
PCB washing Only pure water or alcohol recommended
• On-board style – 1.65 mm high
• InBoard® style – only 1.19 high