Electronic Components Datasheet Search |
|
D2JW-01K1A1-MD Datasheet(PDF) 2 Page - Omron Electronics LLC |
|
D2JW-01K1A1-MD Datasheet(HTML) 2 Page - Omron Electronics LLC |
2 / 8 page 190 Sealed Snap Action Switch D2JW Specifications ■ Characteristics Note: 1. Data shown are of initial value. 2. The values are for pin plunger type. 3. The dielectric strength values shown apply when using a separator (terminal type) 4. The values shown apply for malfunctions of 1 ms max. ■ Ratings Note: The ratings apply under the following test conditions: Ambient Temperature = 20 ±2°C, Ambient Humidity = 65 ±5%, Operating frequency = 30 operations/min. ■ Contact Specifications Note: Minimum applicable loads are indicated by N standard refer- ence values. This value represents the failure rate at a 60% (λ 60) reliability level (JIS C5003). The equation λ 60=0.5 x 10 -6 / operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability level of 60% Engineering Data ■ Construction ■ Contact Form Operating speed (see note 2) 1 mm to 250 mm/second Operating frequency Mechanical: 240 operations per minute max. Electrical: 30 operations per minute max. Contact resistance 100 m Ω max. (Molded lead type: 140 mΩ min.) Insulation resistance 100 M Ω min. (at 500 VDC) Dielectric strength (See note 3) 600 VAC, 50/60 Hz for 1 minute between terminals of same polarity 1,000 VAC, 50/60 Hz for 1 minute between current-carrying metal part and ground, and between each terminal and noncurrent-carrying metal part Vibration resistance (See note 4) Malfunction: 10 to 55 Hz, 1.5 mm double amplitude Shock resistance (See note 4) Destruction: 1,000 m/s2 (approx. 100G) max. Malfunction: 200 m/s2 (approx. 20G) max. Ambient operating temperature -40 ° to 85°C (at 60% RH) with no icing or condensation Ambient operating humidity 35% to 98% (for 5 °C to 35°C) Degree of protection IEC IP67 (excluding the terminals on terminal models) Degree of protection against electric shock Class I Proof tracking index (PRTI) 175 Service life Mechanical: 1,000,000 operations min. at 60 operations per minute Electrical: 100,000 operations min. at 30 operations per minute Weight Approx. 7 g (pin plunger with molded lead wire models) Electrical rating 0.1 A, 30 VDC (resistive load) Item Specification Specification Crossbar Material Gold alloy Gap (standard value) 0.5 mm Inrush current 0.1 A max. Minimum applicable load (see note) 1 mA at 5 VDC Rubber seal (silicone rubber) Soldered Epoxy resin Cover (polycarbonate resin) NC (Red*) NO (Blue*) COM (Black*) NC (Red) COM (Black) SPDT SPST-NC NO (Blue) COM (Black) SPST-NO *Indicates the color of the lead wire. |
Similar Description - D2JW-01K1A1-MD |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |