Electronic Components Datasheet Search |
|
D3M-01K2-3 Datasheet(PDF) 5 Page - Omron Electronics LLC |
|
D3M-01K2-3 Datasheet(HTML) 5 Page - Omron Electronics LLC |
5 / 8 page Subminiature Snap Action Switch D3M 61 Precautions Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide, “Snap Action Switches, Technical Information” for correct use. ■ Correct Use Mounting Make sure that the surface to which the D3M is mounted is flat. If the surface is not flat, the housing may distort, and the D3M may malfunction, or the housing may crack. Operating Stroke Make sure that the dog is separated from the actuator when the actu- ator is in the free position and that the actuator is pressed appropri- ately when the D3M is actuated. The actuator must not be pressed excessively to reach the maximum overtravel position, or the D3M may be damaged. Make sure the actuator is pressed in the direction where the D3M is actuated. Using Microloads Using a model for ordinary loads to switch microloads may result in faulty operation. Instead, use the models that are designed for microloads and that operate in the following range; However, even when using microload models within the operating range shown above, if inrush current or inductive voltage spikes occur when the contact is opened or closed, then contact wear may increase and so decrease the service life. Therefore, insert a contact protection circuit where necessary. Wiring The terminals connect to JST’s Dipole XA Connector. The Dipole XA Connector consists of the following components. Contact: SAX-001T-P0.6 Housing: XAP-02V-1 OMRON does not sell the Dipole XA Connector. Contact J.S.T. Manufacturing Co. for these connectors. ■ Cautions Handling To avoid an electric shock or a fire, be sure to turn OFF the D3M before mounting, removing, wiring, or servicing. !CAUTION The voltage and current applied to the D3M must be within the rat- ed ranges when it is turned ON, turned OFF, and in operation, or the service life of the D3M may be shortened. Also note that if in- appropriate voltage and current are applied, the D3M may radiate heat and burn. Operating range Inoper- able range Current (mA) 1,000 100 10 1 0.1 100mA 100mA 0.16mA 30 12 24 5 0 1mA |
Similar Description - D3M-01K2-3 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |