Electronic Components Datasheet Search |
|
PAS302BCA-32 Datasheet(PDF) 9 Page - Pixart Imaging Inc. |
|
PAS302BCA-32 Datasheet(HTML) 9 Page - Pixart Imaging Inc. |
9 / 15 page PAS302BCA-32 CMOS Image Sensor IC Version 2.3, 13 Sep. 2004 PixArt Imaging Inc. E-mail: fae_service@pixart.com.tw 9 5.2. Data Transfer Format 5.2.1. Master transmits data to slave (write cycle) S : Start A : Acknowledge by slave P : Stop RW : The LSB of 1st byte to decide whether current cycle is read or write cycle. If RW=1 that means read cycle, if RW=0 that means write cycle.. SUBADDRESS : The address values of PAS302BCA-32 internal control registers (Please refer to PAS302BCA-32 register description) During the write cycle, the master generates start condition and then places the 1st byte data that combined slave address (7 bits) with a read/write control bit on SDA line. After slave(PAS302BCA-32) issues acknowledgment, the master places 2nd byte (sub-address) data on SDA line. And then following the slave’s( PAS302BCA-32) acknowledgment, the master places the 8 bits data on SDA line and transmit to PAS302BCA-32 control register (address was assigned by 2nd byte). After PAS302BCA-32 issue acknowledgment, the master can generate a stop condition to end this write cycle. In the condition of multi-byte write, the PAS302BCA-32 sub-address will be increased automatically after each DATA byte has been transferred. The Data and A cycles are repeated until last byte write. Every control registers value inside PAS302BCA-32 can be programming via this way. (Please refer to Figure 5.3.) 5.2.2. Slave transmits data to master (read cycle) The sub-address was assigned by previous write cycle The sub-address is automatically increased after each byte read Am : Acknowledged by master Note there is no acknowledgment from master after last byte read During read cycle, the master generates start condition and then place the 1st byte data that combine slave address (7 bits) with a read/write control bit to SDA line. After slave issue acknowledgment, 8 bits DATA was placed on SDA line by PAS302BCA-32. The 8 bit data was read from PAS302BCA-32 internal control register that address was assigned by previous write cycle. Following the master acknowledgment, the PAS302BCA-32 place the next 8 bits data (address is increased automatically) on SDA line and then transfer to master serially. The DATA and Am cycles are repeated until the last byte read. After last byte read, Am is no longer S SLAVE ADDRESS (7 BITS) RW A DATA (8 BIT) Am DATA 1 P 1ST BYTE 2ND BYTE n BYTE NO ACK IN LAST BYTE Am DATA S SLAVE ID (7 BIT) RW A SUBADDRESS (8 BIT) A DATA P A 1ST BYTE 2ND BYTE n BYTEs + A MSB LSB=0 A DATA |
Similar Part No. - PAS302BCA-32 |
|
Similar Description - PAS302BCA-32 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |