1177 East Tower Road, Schaumburg, IL 60173

Tel: 847-884-6664

Fax: 847-884-6665

E-mail: sales@tocos.com

www.tocos.com

68

Specifications

Electrical

Standard Resistance Range . . . . . . . . . . . . . . 10

Ω to 5MΩ

(standard 1, 2 & 5 sequence )

Resistance Tolerance . . . . . . . . . . . . . . .

10% and

20%

End Resistance . . . . . . . . . . 1% or 1

Ω, whichever is greater

Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . . . . Linear

Peak Noise (C.R.V.) . . . . . . . 1% or 1

Ω, whichever is greater

Power Rating . . . . . . . . 0.5 watt at

70 C, 0 watt at

125 C

Maximum Input Voltage . . . . . . . . 250VDC or power rating,

whichever is smaller

Temperature Coefficient . . . . . . . . . . . . . . . .

100ppm / C

Insulation Resistance . . . . . 1,000M

Ω minimum at 500VDC

Dielectric Strength . . . . . . . . . . . . . . . . . 900VAC, 1 minute

Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 210

10

Mechanical

Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 250

10

Flammability of Plastic Materials . . . . . . . Meets UL 94V-0

Nominal Weight . . . . . . . . . . . . . . 0.54g (PK, P1K, WK, UK )

0.64g (SK, S1K, XK, X1K, VK, V1K )

Marking . . . . . . . . . Resistance code, date code, model type

Environmental

Temperature Range . . . . . . . . . . . . . . . . .

55 Cto

125 C

Low Temperature Operation . . . .

55 C, 0.5 watt, 2 hours

∆T/R ) 2%, S.S. ) 2%

High Temperature Exposure . . . . . . . . .

125 C, 250 hours

∆T/R ) 2%, S.S. ) 2%

Load Life . . . . . . . . . . . . . . . . .

70 C, 0.5 watt, 1,000 hours

∆T/R ) 3%, S.S. ) 2%

Thermal Shock . . . . . . . . . . . . . . . . . . . . . .

55 C,

125 C,

30 minutes each, 5 cycles

∆T/R ) 1%, S.S. ) 1%

Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each

∆T/R ) 1%, S.S. ) 1%

Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,

20G, 12 hours

∆T/R ) 1%, S.S. ) 1%

Humidity . . . . . . . . . . . . . . . . . . . . . . . .

40 C, 90-95%RH,

0.5 watt, 500 hours

∆T/R ) 3%, S.S. ) 2%

Moisture Resistance . . . . . .

10 C to

65 C, 80-98%RH,

0.5 watt, 10 cycles, 240 hours

∆T/R ) 2%

Soldering Heat Resistance . . . . . . . . . . . 350 C, 3 seconds

∆T/R ) 1%

Seal Test . . . . . . . . . . . . . . . . .

85 C, hot water for 1 minute

Rotational Life . . . . . . . . . . 100 cycles without discontinuity

∆T/R ) (2Ω 3%)

∆T/R = Total Resistance Change; S.S. = Setting Stability (voltage ratio)

1/4’’ Square, Single-Turn, Through-Hole Sealed Cermet Trimmers

POTENTIOMETERS

Features

1/4” square, single-turn, through-hole, sealed cermet trimmers

Top and side adjust styles available

Knob on all models for convenient fingertip adjustment

Same design and housing sizes as GF063 series

Precious metal, multi-contact wiper design

Meets UL 94V-0 flammability requirements

Sealed to withstand immersion cleaning processes

Tape and ammo box available for PK, P1K and UK models

All GF063-K models are available without knobs.

Refer to GF063 Series on page 56.