Electronic Components Datasheet Search |
|
X25168S8I Datasheet(PDF) 8 Page - Xicor Inc. |
|
X25168S8I Datasheet(HTML) 8 Page - Xicor Inc. |
8 / 16 page X25648/49, X25328/29, X25168/69 8 D.C. OPERATING CHARACTERISTICS (Over the recommended operating conditions unless otherwise specified.) 7036 FRM T09 POWER-UP TIMING 7036 FRM T10 CAPACITANCE TA = +25°C, f = 1MHz, VCC = 5V. Notes: (1) VIL min. and VIH max. are for reference only and are not tested. 7036 FRM T11 (2) This parameter is periodically sampled and not 100% tested. Symbol Parameter Limits Units Test Conditions Min. Typ. Max. ICC1 VCC Write Current (Active) 5 mA SCK = VCC x 0.1/VCC x 0.9 @ 2MHz, SO = Open ICC2 VCC Read Current (Active) 0.4 mA SCK = VCC x 0.1/VCC x 0.9 @ 2MHz, SO = Open ISB1 VCC Standby Current WDT=OFF 1 µA CS = VCC, VIN = VSS or VCC, VCC = 5.5V ISB2 VCC Standby Current WDT=ON 50 µA CS = VCC, VIN = VSS or VCC, VCC = 5.5V ISB3 VCC Standby Current WDT=ON 20 µA CS = VCC, VIN = VSS or VCC, VCC =3.6V ILI Input Leakage Current 0.1 10 µA VIN = VSS to VCC ILO Output Leakage Current 0.1 10 µA VOUT = VSS to VCC VIL (1) Input LOW Voltage –0.5 VCCx0.3 V VIH (1) Input HIGH Voltage VCCx0.7 VCC+0.5 V VOL1 Output LOW Voltage 0.4 V VCC > 3.3V, IOL = 2.1mA VOL2 Output LOW Voltage 0.4 V 2V < VCC ≤ 3.3V, IOL = 1mA VOL3 Output LOW Voltage 0.4 V VCC ≤ 2V, IOL = 0.5mA VOH1 Output HIGH Voltage VCC–0.8 V VCC > 3.3V, IOH = –1.0mA VOH2 Output HIGH Voltage VCC–0.4 V 2V < VCC ≤ 3.3V, IOH = –0.4mA VOH3 Output HIGH Voltage VCC–0.2 V VCC ≤ 2V, IOH = –0.25mA VOLRS Reset Output LOW Voltage 0.4 V IOL = 1mA Symbol Parameter Min. Max. Units tPUR (2) Power-up to Read Operation 1 ms tPUW (2) Power-up to Write Operation 5 ms Symbol Test Max. Units Conditions COUT (2) Output Capacitance (SO, RESET, RESET) 8 pF VOUT = 0V CIN (2) Input Capacitance (SCK, SI, CS, WP) 6 pF VIN = 0V ABSOLUTE MAXIMUM RATINGS* Temperature under Bias ........................–65 °Cto+135°C Storage Temperature .............................–65 °C to +150°C Voltage on any Pin with Respect to VSS....... –1.0V to +7V D.C. Output Current ....................................................5mA Lead Temperature (Soldering, 10 seconds)............ 300 °C RECOMMENDED OPERATING CONDITIONS 7036 FRM T07 *COMMENT Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and the functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 7036 FRM T08 Temp Min. Max. Commercial 0 °C 70 °C Industrial –40 °C +85 °C Supply Voltage Limits X25XXX–1.8 1.8V-3.6V X25XXX–2.7 2.7V to 5.5V X25XXX 4.5V-5.5V |
Similar Part No. - X25168S8I |
|
Similar Description - X25168S8I |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |