B69

1.27mm Pitch Two-Piece Connector

HIF6 Series

sFeatures

1. Product Variation

The connection method is available with the board to

board type and insulation displacement type.

2. Broad applications

HIF2E, HIF3B and HIF5 can be combined one other,

because the 1.27mm pitch flat cable is used.

3. Applicable Cables

The applicable cable is a (UL2651) AWG #28 flat cable

(7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm)

4. Mis-insertion Preventive Structure

The mis-insertion preventive guide prevents mis-

insertion.

Rating

Current rating: 0.5A

Voltage rating: 125V AC

Operating Temperature Range: -55 to +85 ç (Note 1)

Operating Humidity Range: 40 to 80%

Storage Temperature Range: -10 to +60ç (Note 2)

Operating Humidity Range: 40 to 70%

(Note 2)

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for

a specific part number shown.

Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.

250V DC

300V AC/1 minute.

0.1A

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

96 hours at temperature of 40ç and humidity of 90% to 95%

500 cycles

Solder bath: 260ç for 10 seconds

Manual soldering: 360ç for 5 seconds

1000M ohms min.

No flashover or insulation breakdown.

30m ohms max.

No electrical discontinuity of 1µs or more

Insulation resistance: 1000M ohms min.

Contact resistance: 30m ohms max.

No damage, cracks, or parts looseness.

No deformation of components affecting performance.

(-65ç: 30 minutes¡15 to 35ç: 5 minutes max.¡

125ç: 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles

1.Insulation Resistance

2.Withstanding Voltage

3.Contact Resistance

4.Vibration

5.Humidity (Steady state)

6.Temperature Cycle

7.Durability (Mating/un-mating)

8.Resistance to Soldering heat

Item

Specification

Condition

sApplications

Computers, peripheral and terminal equipment, PPC, various kinds of electronic equipment, Office Automation machines

sProduct Specifications

qHIF3B Series

(MIL-C-83503)

qHIF5 Series

(Card edge type)

qHIF2 Series

(Board direct mount type)

qRC Series

(Micro ribbon connector)

qFD Series

(D sub-ribbon connector)

Photo1 (For further information, refer to catalog page B86.)

Connector in combination with the HIF6 series connection type

1

2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.