Electronic Components Datasheet Search |
|
MAP130-4020 Datasheet(PDF) 2 Page - Power-One |
|
MAP130-4020 Datasheet(HTML) 2 Page - Power-One |
2 / 4 page 2 MULTIPLE OUTPUT MODEL SELECTION CHART (CONT.) – 130W CONTINUOUS OUTPUT POWER MODEL OUTPUT ADJUSTMENT OUTPUT PEAK CURRENT LINE LOAD TYPICAL RIPPLE & INITIAL SETTING VOLTAGE RANGE CURRENT (NOTE 1) REGULATION REGULATION NOISE %p-p (NOTE 2) ACCURACY +5V 4.75V to 5.50V 20A 30A 1% 1% 1% 5.1V to 5.2V MAP130-4003 +15V 14.0V to 16.0V 4A 8A 1% 2% 1% 15.0V to 15.1V -5V Fixed 1A 1A 2% 2% 1% 4.9V to 5.1V -15V Fixed 1A 1A 2% 2% 1% 14.7V to 15.3V +5V 4.75V to 5.50V 20A 30A 0.2% 1% 1% 5.15V to 5.2V MAP130-4004 +24V 23.0V to 25.0V 3.5A 5A 0.5% 2% 1% 23.9V to 24.1V -15V Fixed 1A 1A 0.5% 2% 1% -14.5V to -15.5V +15V Fixed 1A 1A 0.5% 2% 1% 14.5V to 15.5V +5V 4.75V to 5.50V 20A 30A 0.2% 1% 1% 5.1V to 5.25V MAP130-4010 +12V 11.5V to 12.8V 5A 10A 0.5% 2% 1% 11.75V to 12.0V -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.2V -12V Fixed 3A 3A 0.5% 2% 1% -11.6V to -12.4V +5V 4.75V to 5.50V 20A 30A 0.2% 1% 1% 5.1V to 5.25V MAP130-4020 +12V 11.5V to 12.8V 5A 10A 0.5% 2% 1% 11.75V to 12.0V -12V Fixed 1A 1A 0.5% 2% 1% -11.6V to -12.4V -5V Fixed 3A 3A 0.5% 2% 1% -4.8V to -5.2V NOTES: 1) Peak loads up to 165 Watts, (total of all outputs), for 60 seconds or less are acceptable, (10% duty cycle max.). 2) Maximum peak to peak noise expressed as a percentage of output voltage, 20MHz bandwidth. INPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Input Voltage- AC Auto-ranging. Low Range 90 115 132 VAC High Range 175 230 264 Input Frequency AC Input. 47 63 Hz Brown out Protection Lowest AC input voltage that regulation is maintained with full rated loads. 90 VAC Hold-up Time Nominal AC input voltage (115 VAC). 130W load: 40 mS Input Current 90 VAC, 130W load. 3.3 ARMS Input Protection Non-user serviceable internally located AC input line fuse. Inrush Surge Current Internally limited by thermistor. Vin = 264 VAC (one cycle). 25° C. 38 APK Operating Frequency Switching frequency of main transformer (variable). Range: 16 120 kHz OUTPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Efficiency Full Load, 115VAC. Varies with distribution of loads among outputs. 71 80 % Minimum Loads MAP130-1012. 1.25 MAP130-1024. 0.63 Amps MAP130-1005 and all multiple output models, main channel only. 3.00 Ripple and Noise Full load, 20MHz bandwidth. See Model Selection Chart Output Power Continuous output power, all multiple output models. 130 Watts Peak output power (60s maximum, 10% duty cycle), all multiple output models. 165 Overshoot /Undershoot Output voltage overshoot/undershoot at turn-on / turn-off 1 % Regulation Varies by output, Total regulation includes: line changes from 90-132 VAC See Model Selection Chart or 175-264, changes in load starting at 20% load and changing to 100% load. Transient Response Recovery time to within 1% of initial set point due to a 50-100% load change, 500 µS 4% max. deviation. (Main output only on multi-output units) Turn-on Delay Time required for initial output voltage stabilization. 2 Sec Turn-on Rise Time Time required for output voltage to rise from 10% to 90%. 20 mS MAP130 SERIES |
Similar Part No. - MAP130-4020 |
|
Similar Description - MAP130-4020 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |