Corcom Facility EMI Filters Product Guide

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric

USA Cust. Svc.:

1-800-468-2023

equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.

Corcom Prods:

1-847-680-7400

12

Catalog: 1654986

Issue Date: 11.2009

www.tycoelectronics.com

www.corcom.com

CDEUL Series

CDEUL Series - Extended Range Buffer Networks (Inductive Input)

Filter Cabinet

• Modified NEMA I, constructed of not less than #14

gauge CRS with galvanized bulkhead

• Blue epoxy finish to all non-conductive surfaces

• R.F. Radiation of the shielded (load) compartment

greater than 100 dB from 14 kHz to 10 GHz

• Front cover access, dual cover design

• Filter inserts pre-wired to standoffs and lugs

• Lifting hooks and mounting tabs

• Legs for floor mount available (see page 24)

Individual Filters

• Sealed components with welded and/or soldered

seams

• Constructed of not less than #16 gauge steel with

corrosion resistant plating

• Bleeder resistor to eliminate shock hazard provided

• HEMP Surge arrestors provided upon request‡

Electrical Characteristics

Voltage Drop:

Less than 1% @ unity power factor

Overload:

140% of rated current for 15 minutes

Harmonic Distortion:

Less than 2% @ full rated current

Dielectric Withstanding Voltage:

Per MIL-PRF-15733 and UL1283

D.C. Insulation Resistance:

Per MIL-STD-202, Method 302

Terminal Strength:

Per MIL-STD-202, Method 211, Condition E

Temperature Rise:

Per MIL-PRF-15733 and UL1283

R.F. Radiation:

100 dB minimum shielding effectiveness

Insertion Loss:

100 dB from 14 kHz - 10 GHz per MIL-STD-220A, under

load condition, using extended range buffer networks

over the frequency range of 14 kHZ - 20 MHz

Applicable Publications:

MIL-PRF-15733 — Filters, radio interference

MIL-STD-202 — Test methods for Components

MIL-STD-220A — Test method of Insertion Loss

MIL-STD-188-125 — HEMP

MIL-STD-285 — Test method for Shielding Effectiveness

NFPA 70-1987 — National Electric Code

486A - 1983 — Wire Connectors and Lug

UL1283 — Underwriter Laboratories

6P16 †

How to Order:

† 60 Hz Models Only

Shown with optional legs

CDEUL 4 01000 A6 -S -L

Voltage/Frequency

A6 - 120/208V, 60Hz

B6 - 277/480V, 60Hz

A4 - 120/208V, 400Hz

Legs

Current Rating

# of Filters

Series

1

Examples:

CDEUL401000A6-S-L =

4, 1000A CDEUL, 120/280V filters in cabinet

with surge arrestors and legs

CDEUL300030B6 =

3, 30A CDEUL, 277/480V filters in cabinet

2

Note 1:

Surge Arrestor for A6/A4* Models: V251BA60

Surge Arrestor for B6 Models: V481BA60

Note 2:

Current configuration listed as 5 digits with leading zeros

‡ Intended for HEMP applications <150A. For filters rated >225A refer

to the new TECUL Series on page 14.