Electronic Components Datasheet Search |
|
CC2530F256RHAT Datasheet(PDF) 5 Page - Texas Instruments |
|
|
CC2530F256RHAT Datasheet(HTML) 5 Page - Texas Instruments |
5 / 31 page GENERAL CHARACTERISTICS RF RECEIVE SECTION CC2530F32, CC2530F64, CC2530F128, CC2530F256 www.ti.com .......................................................................................................................................................... SWRS081A – APRIL 2009 – REVISED APRIL 2009 Measured on Texas Instruments CC2530 EM reference design with TA = 25°C and VDD = 3 V, unless otherwise noted. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT WAKE-UP AND TIMING Digital regulator on, 16-MHz RCOSC and 32-MHz crystal Power mode 1 → active 4 µs oscillator off. Start-up of 16-MHz RCOSC Digital regulator off, 16-MHz RCOSC and 32-MHz crystal Power mode 2 or 3 → active 0.1 ms oscillator off. Start-up of regulator and 16-MHz RCOSC Initially running on 16-MHz RCOSC, with 32-MHz XOSC 0.5 ms OFF Active → TX or RX With 32-MHz XOSC initially on 192 µs RX/TX and TX/RX turnaround 192 µs RADIO PART Programmable in 1-MHz steps, 5 MHz between channels RF frequency range 2394 2507 MHz for compliance with [1] Radio baud rate As defined by [1] 250 kbps Radio chip rate As defined by [1] 2 MChip/s Measured on Texas Instruments CC2530 EM reference design with TA = 25°C, VDD = 3 V, and fc = 2440 MHz, unless otherwise noted. Boldface limits apply over the entire operating range, TA = –40°C to 125°C, VDD = 2 V to 3.6 V, and fc = 2394 MHz to 2507 MHz. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT PER = 1%, as specified by [1] –97 –92 Receiver sensitivity dBm –88 [1] requires –85 dBm PER = 1%, as specified by [1] Saturation (maximum input level) 10 dBm [1] requires –20 dBm Wanted signal –82 dBm, adjacent modulated channel at Adjacent-channel rejection, 5-MHz 5 MHz, PER = 1 %, as specified by [1]. 49 dB channel spacing [1] requires 0 dB Wanted signal –82 dBm, adjacent modulated channel at Adjacent-channel rejection, –5-MHz –5 MHz, PER = 1 %, as specified by [1]. 49 dB channel spacing [1] requires 0 dB Wanted signal –82 dBm, adjacent modulated channel at Alternate-channel rejection, 10-MHz 10 MHz, PER = 1%, as specified by [1] 57 dB channel spacing [1] requires 30 dB Wanted signal –82 dBm, adjacent modulated channel at Alternate-channel rejection, –10-MHz –10 MHz, PER = 1 %, as specified by [1] 57 dB channel spacing [1] requires 30 dB Channel rejection Wanted signal at –82 dBm. Undesired signal is an IEEE ≥ 20 MHz 802.15.4 modulated channel, stepped through all channels 57 dB from 2405 to 2480 MHz. Signal level for PER = 1%. ≤ –20 MHz 57 Wanted signal at –82 dBm. Undesired signal is 802.15.4 Co-channel rejection modulated at the same frequency as the desired signal. Signal –3 dB level for PER = 1%. Blocking/desensitization 5 MHz from band edge Wanted signal 3 dB above the sensitivity level, CW jammer, –33 10 MHz from band edge PER = 1%. Measured according to EN 300 440 class 2. –33 20 MHz from band edge –32 dBm 50 MHz from band edge –31 –5 MHz from band edge –35 –10 MHz from band edge –35 –20 MHz from band edge –34 –50 MHz from band edge –34 Copyright © 2009, Texas Instruments Incorporated Submit Documentation Feedback 5 Product Folder Link(s): CC2530F32 CC2530F64 CC2530F128 CC2530F256 |
Similar Part No. - CC2530F256RHAT |
|
Similar Description - CC2530F256RHAT |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |