RICOH COMPANY, LTD.

ELECTRONIC DEVICES DIVISION

HEADQUARTERS

13-1, Himemuro-cho, Ikeda City, Osaka 563-8501, JAPAN

Phone 81-727-53-1111 Fax 81-727-53-6011

YOKOHAMA OFFICE (International Sales)

3-2-3, Shin-Yokohama, Kohoku-ku, Yokohama City, Kanagawa 222-8530,

JAPAN

Phone 81-45-477-1697 Fax 81-45-477-1694 · 1695

http://www.ricoh.co.jp/LSI/english/

RICOH CORPORATION

ELECTRONIC DEVICES DIVISION

SAN JOSE OFFICE

3001 Orchard Parkway, San Jose, CA 95134-2088, U.S.A.

Phone 1-408-432-8800

Fax 1-408-432-8375

NOTICE

1. The products and the product specifications described in this document are subject to change or discontinuation

of production without notice for reasons such as improvement. Therefore, before deciding to use the products,

please refer to Ricoh sales representatives for the latest information thereon.

2. This document may not be copied or otherwise reproduced in whole or in part without prior written consent of

Ricoh.

3. Please be sure to take any necessary formalities under relevant laws or regulations before exporting or other-

wise taking out of your country the products or the technical information described herein.

4. The technical information described in this document shows typical characteristics of and example application

circuits for the products. The release of such information is not to be construed as a warranty of or a grant of

license under Ricoh's or any third party's intellectual property rights or any other rights.

5. The products listed in this document are intended and designed for use as general electronic components in

standard applications (office equipment, computer equipment, measuring instruments, consumer electronic

products, amusement equipment etc.). Those customers intending to use a product in an application requiring

extreme quality and reliability, for example, in a highly specific application where the failure or misoperation of

the product could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system, traffic

control system, automotive and transportation equipment, combustion equipment, safety devices, life support

system etc.) should first contact us.

6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor

products are likely to fail with certain probability. In order prevent any injury to persons or damages to property

resulting from such failure, customers should be careful enough to incorporate safety measures in their design,

such as redundancy feature, fire-containment feature and fail-safe feature. We do not assume any liability or

responsibility for any loss or damage arising from misuse or inappropriate use of the products.

7. Anti-radiation design is not implemented in the products described in this document.

8. Please contact Ricoh sales representatives should you have any questions or comments concerning the prod-

ucts or the technical information.

1995 June