Surge arrester

B88069X7031B041

LN-class I / high follow current

LN38-A800XHC

KB AB E / KB AB PM

Issue 02 / 2008-01-17

Please read Cautions and warnings and

Page 3 of 4

Important notes at the end of this document.

Dimensional drawing

Cautions and warnings

The surge arrester must be selected so that the maximum expected follow current can be

quenched.

The follow current must be limited so that the arrester can be properly extinguished when the

surge arrester decayed.

If the contacts of the surge arresters are defective, current stress can lead to the formation of

sparks and loud noises.

Surge arresters may become hot in case of longer periods of current stress (danger of burning).

Surge arresters may be used only within their specified values. In case of overload, the head

contacts may fail or the component may be destroyed.

Damaged surge arresters must not be re-used.

Not to scale

Dimensions in mm

Non controlled document