ISP1302_07 datasheet(2/64 Pages) NXP

Part #	ISP1302

Description	Universal Serial Bus On-The-Go transceiver with carkit support

Download	64 Pages

Scroll/Zoom	100%

Manufacturer	NXP [NXP Semiconductors]

Direct Link	http://www.nxp.com

Logo

2 / 64 page

1.

General description

The ISP1302 is a Universal Serial Bus (USB) On-The-Go (OTG) transceiver device that

supports

USB Carkit Speciﬁcation (CEA-936-A), November 2005. It is fully compliant with

Universal Serial Bus Speciﬁcation Rev. 2.0 and On-The-Go Supplement to the USB

Speciﬁcation Rev. 1.2. The ISP1302 can transmit and receive serial data at full-speed

(12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.

The ISP1302 is available in HVQFN24 and WLCSP25 packages.

2.

Features

I Fully complies with:

N Universal Serial Bus Speciﬁcation Rev. 2.0

N On-The-Go Supplement to the USB Speciﬁcation Rev. 1.2

N On-The-Go Transceiver Speciﬁcation (CEA-2011)

N USB Carkit Speciﬁcation (CEA-936-A), November 2005

I Can transmit and receive serial data at full-speed (12 Mbit/s) and low-speed

(1.5 Mbit/s) data rates

I Supports OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)

I Supports I2C-bus (up to 400 kHz) serial interface to access control and status registers

I Supports Universal Asynchronous Receiver-Transmitter (UART) pass-through on the

DP and DM lines

I Supports service mode with 2.8 V UART signaling on the DP and DM lines

I Built-in analog switches to support analog audio signals multiplexed on the DP and DM

lines

I Built-in DC biasing for audio signals on the DP and DM lines

I Supports both 4-wire and 5-wire signaling protocol for carkit application

I Supports data-during-audio mode for smart carkit application

I Built-in charge pump regulator outputs 5 V at current up to 50 mA

I 3.0 V to 4.5 V power supply input range (VCC)

I Supports wide range digital interfacing I/O voltage (VCC(I/O)) 1.4 V to 3.6 V

I Full industrial grade operation from −40 °C to +85 °C

I Available in small HVQFN24 and WLCSP25 halogen-free and lead-free packages

ISP1302

Universal Serial Bus On-The-Go transceiver with carkit

support

Rev. 01 — 24 May 2007

Product data sheet

Similar Part No. - ISP1302_07

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	ISP1301	245Kb / 46P	Universal Serial Bus On-The-Go transceiver Rev. 01-14 April 2004
NXP Semiconductors	ISP1301BS	245Kb / 46P	Universal Serial Bus On-The-Go transceiver Rev. 01-14 April 2004

More results

Similar Description - ISP1302_07

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	ISP1109	295Kb / 59P	Universal Serial Bus transceiver with carkit support Rev. 01-14 July 2005
	ISP1301	245Kb / 46P	Universal Serial Bus On-The-Go transceiver Rev. 01-14 April 2004
	ISP1506A	400Kb / 79P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 01 - 30 May 2007
	SAF1508BET	462Kb / 87P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 2-23 July 2012
	ISP1504A	414Kb / 84P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 01-19 October 2006
	ISP1504A1	428Kb / 81P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 01-6 August 2007
	ISP1507ABS	424Kb / 81P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 01-19 May 2008
	ISP1362	647Kb / 150P	Single-chip Universal Serial Bus On-The-Go controller Rev. 03-06 January 2004
	ISP1761BEUM	793Kb / 164P	Hi-Speed Universal Serial Bus On-The-Go controller 13 March 2008
	ISP1761	724Kb / 158P	Hi-Speed Universal Serial Bus On-The-Go controller Rev. 01-12 January 2005

More results

ISP1302 Datasheet(PDF) 2 Page - NXP Semiconductors

ISP1302 Datasheet(HTML) 2 Page - NXP Semiconductors

Similar Part No. - ISP1302_07

Similar Description - ISP1302_07

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL