©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of

their respective owners.

Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve

our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice.

Revision 0.5

Page 1

Pre

limi

nar

y

Newly developed Multi-IO connector module, The Fujitsu Multi-IO microGiGaCN™ series product

supports high speed signal transmission in compact package and easy to install structure. This series of

modules incorporates Fujitsu’s world standard high-speed differential 4 channel IO socket interface which

is defined by SFF 8470, InfiniBand™, 10G Base-CX4, and 10G Fiber Channel. The module is designed to

meet InfiniBand DDR, along with the previously mentioned industry standards, in a 4channel, bi-directional

data transfer mode. The Multi-IO connector module allows for increased I/O port density, while allowing for

ease of signal routing on the main pcb.

The Multi-IO microGiGaCN™ product makes it possible to install multiple modules within a small

area with ease of installation with specially designed board to board high speed connector system. The

original concept for the design is to accommodate 20 ports in a IU form factor. This series of module has

capability to accommodate LED link status indicator and MDC (media detect circuitry, connector detect and

power supply circuitry) for Fujitsu’s o-microGiGaCN™ four channel optical transceiver module, which

extends transmission length up to 300 (2.5Gbps) over optic fiber.

Future versions of module on

development roadmap (1x4 scheduled) will allow users to select the most suitable ones for their

applications. The die cast backshells provide firm and robust mechanical connection.

Future applications will include 1x4, 1x2, and low profile 2x2 with and without AC blocking caps, LED’s, etc.

• Full compatibility with following world industrial standards.

• Four 4x links per module with 2x2 arrangement

• Allows up to twenty 4x links in 1U form factor on single pcb

• Well controlled signal integrity available for DDR signal rate (5Gbps)

• Easy to install structure with high speed board to board interface connector

• Options for Link status LED’s, power line for Fujitsu o-microGiGaCN™ four channel optical

transceiver module (consult factory)

• Robustness by die cast body

• Ease of Signal Routing on motherboard

• Good EMI characteristics with Gasket/Clip on the IO socket

Description

4X IO connector module

Part Number for Existing Product

2x2 Module: FCN-268Y032-A

Straight socket (board side) : FCN-268F036-G/3DB

Features

RoHS Compliant