Electronic Components Datasheet Search |
|
UM603AG-P08-R Datasheet(PDF) 4 Page - Unisonic Technologies |
|
UM603AG-P08-R Datasheet(HTML) 4 Page - Unisonic Technologies |
4 / 6 page UM603/A LINEAR INTEGRATED CIRCUIT UNISONICTECHNOLOGIESCO.,LTD 4 of 6 www.unisonic.com.tw QW-R105-031.D ELECTRICAL CHARACTERISTICS(Cont.) VCC+=+5V, VCC=Ground, VOUT=1.4V, Ta=25°C (unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT OPERATOR2 (independent op-amp)(Note 1) UM603A Ta=25°C TMIN≤Ta≤TMAX 0.5 2 3 mV Input Offset Voltage UM603 VI(OFF) Ta=25 °C TMIN≤Ta≤TMAX 1 4 5 mV Input Offset Voltage Drift DVI(OFF) 7 μV/ °C Input Offset Current II(OFF) TMIN≤Ta≤TMAX 2 30 50 nA Input Bias Current II(BIAS) TMIN≤Ta≤TMAX 20 150 200 nA Large Signal Voltage Gain Avd VCC=15V, RL=2k, VOUT=1.4V~11.4V TMIN≤Ta≤TMAX 50 25 100 V/mV Supply Voltage Rejection Ratio SVRR VCC=5V ~30V 65 100 dB VCC=+30V (Note 1) 0 (VCC +)-1.5 Input Common Mode Voltage Range VI(CM) TMIN≤Ta≤TMAX 0 (VCC +)-2 V Common Mode Rejection Ratio CMRR TMIN≤Ta≤TMAX 70 60 85 dB Output Current Source IO(SOURCE) VCC=+15V, VOUT=2V, Vjd=+1V 20 40 mA Short Circuit to Ground ISC VCC=+15V 40 60 mA Output Current Sink IO(SINK) Vid=-1V, VCC=+15V, VOUT=2V 10 20 mA High Level Output Voltage VOH VCC+=30V Ta=25 , ℃ RL=10k TMIN≤Ta≤TMAX 27 27 28 V Low Level Output Voltage VOL RL=10k TMIN≤Ta≤TMAX 5 20 20 mV Slew Rate at Unity Gain SR VIN=0.5 ~ 3V, VCC=15V RL=2k, CL=100pF, unity gain 0.2 0.4 V/μs Gain Bandwidth Product GBP VCC=30V, RL=2K, CL=100pF f=100kHz, VIN=10mV 0.5 0.9 MHz Total Harmonic Distortion THD f=1kHz Av=20dB, RL=2k, Vcc=30V, CL=100pF, VOUT=2Vpp 0.02 % VOLTAGE REFERENCE PARAMETER SYMBOL Value UNIT Cathode Current Ik 1 ~ 100 mA PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT UM603A ±0.4%, Ta=25°C TMIN≤Ta≤TMAX, VKA=VREF, IKA=10mA 2.49 2.48 2.5 2.51 2.52 V Reference Input Voltage UM603 VREF ±1%, Ta=25°C TMIN≤Ta≤TMAX, VKA=VREF, IKA=10mA 2.475 2.45 2.5 2.525 2.55 Reference Input Voltage Deviation Over Temperature Range △ VREF VKA=VREF; Ik=10mA TMIN≤Ta≤TMAX 7 30 mV Minimum Cathode Current for Regulation IMIN VKA=VREF 0.5 1 mA Dynamic Impedance(Note 2) Z ∣ KA∣ VKA=VREF, Ik=1 △ ~100mA, f<1kHz 0.2 0.5 Ω Note: 1. 2. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is VCC+ -1.5V. But either of both inputs can goto +36V without damage. The dynamic impedance is defined as「ZKA」=△kA/△Ik |
Similar Part No. - UM603AG-P08-R |
|
Similar Description - UM603AG-P08-R |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |