2

sSpecifications

Recommended FPC

Thickness: 0.2 ± 0.03 mm, Gold plated contact pads

sOrdering information

FH 39 J - 51S - 0.3 SHW (10)

Series name:FH

Series No.:39

Blank :Standard

A :Long actuator type

J :Halogen-free requirements

(Flame retardance UL94V-0).

1

2

1

3

2

5

7

4

6

3

Contact pitch:0.3mm

Number of positions

FH39 :25 to 61

FH39A :67, (71 under planning)

FH39J :25 to 51

4

Termination type

SHW...SMT horizontal staggered row mount type

Plating specifications

(10)...Gold plating with nickel barrier

7

6

Storage

temperature range

Storage

humidity range

-10 to +50°C (Note 2)

Relative humidity 90% max.

(No condensation)

Ratings

Current rating

Voltage rating

0.2 A

30 Vrms AC

Operating

temperature range

Operating

humidity range

-55 to +85°C (Note 1)

Relative humidity 90% max.

(No condensation)

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage,

shipment or during transportation after board mounting.

Note 3: Information contained in this catalog represents general requirements for this Series.

Contact us for the drawings and specifications for a specific part number shown.

Item

Specification

Conditions

1.Insulation resistance

2.Withstanding voltage

3.Contact resistance

4.Durability

5.Vibration

6.Shock

7.Humidity

(Steady state)

8.Temperature cycle

9.Resistance to

soldering heat

50 Mø min.

No flashover or insulation breakdown

100 mø max.

* Including FPC and FFC conductor resistance

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

No electrical discontinuity of 1µs or longer

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

No electrical discontinuity of 1µs or longer

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

Contact resistance: 100 mø max.

Insulation resistance: 50 Mø min.

No damage, cracks, or parts dislocation

Contact resistance: 100 mø max.

Insulation resistance: 50 Mø min.

No damage, cracks, or parts dislocation

No deformation of components affecting

performance

100 V DC

90 Vrms AC / 1 minute

1 mA, AC max (AC: 1kHz)

10 cycles

Frequency: 10 to 55 Hz,

single amplitude of 0.75 mm,

10 cycles in each of the 3 axis

Acceleration of 981m/s

sine half-wave, 3 cycles in each of the 3 axis

96 hours at 40ç and humidity of 90 to 95%

Temperature:-55ç➝+15ç to +35ç➝+85ç➝+15ç to +35ç

Time: 30➝ 2 to 3 ➝ 30➝ 2 to 3 minutes

5 cycles

Reflow: At the recommended temperature profile

Manual soldering: 350ç ± 5ç for 5 seconds

Part

Material

Finish

Remarks

Insulator

LCP

Color:Beige

UL94V-0

PA

Color:Black

Contacts

Phosphor bronze

Gold plated

-----------------

Metalfittings

Pure tin reflow plated

-----------------

sMaterials

5

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.