LPC2377_10 datasheet(11/68 Pages) NXP

Part #	LPC2377

Description	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash withISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC

Download	68 Pages

Scroll/Zoom	100%

Manufacturer	NXP [NXP Semiconductors]

Direct Link	http://www.nxp.com

Logo

11 / 68 page

LPC2377_78

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 5 — 17 June 2010

11 of 68

NXP Semiconductors

LPC2377/78

Single-chip 16-bit/32-bit microcontrollers

P2[1]/PWM1[2]/

RXD1/

PIPESTAT0

106[1]

I/O

P2[1] — General purpose digital input/output pin.

O

PWM1[2] — Pulse Width Modulator 1, channel 2 output.

I

RXD1 — Receiver input for UART1.

O

PIPESTAT0 — Pipeline Status, bit 0.

P2[2]/PWM1[3]/

CTS1/

PIPESTAT1

105[1]

I/O

P2[2] — General purpose digital input/output pin.

O

PWM1[3] — Pulse Width Modulator 1, channel 3 output.

I

CTS1 — Clear to Send input for UART1.

O

PIPESTAT1 — Pipeline Status, bit 1.

P2[3]/PWM1[4]/

DCD1/

PIPESTAT2

100[1]

I/O

P2[3] — General purpose digital input/output pin.

O

PWM1[4] — Pulse Width Modulator 1, channel 4 output.

I

DCD1 — Data Carrier Detect input for UART1.

O

PIPESTAT2 — Pipeline Status, bit 2.

P2[4]/PWM1[5]/

DSR1/

TRACESYNC

99[1]

I/O

P2[4] — General purpose digital input/output pin.

O

PWM1[5] — Pulse Width Modulator 1, channel 5 output.

I

DSR1 — Data Set Ready input for UART1.

O

TRACESYNC — Trace Synchronization.

P2[5]/PWM1[6]/

DTR1/

TRACEPKT0

97[1]

I/O

P2[5] — General purpose digital input/output pin.

O

PWM1[6] — Pulse Width Modulator 1, channel 6 output.

O

DTR1 — Data Terminal Ready output for UART1.

O

TRACEPKT0 — Trace Packet, bit 0.

P2[6]/PCAP1[0]/

RI1/

TRACEPKT1

96[1]

I/O

P2[6] — General purpose digital input/output pin.

I

PCAP1[0] — Capture input for PWM1, channel 0.

I

RI1 — Ring Indicator input for UART1.

O

TRACEPKT1 — Trace Packet, bit 1.

P2[7]/RD2/

RTS1/

TRACEPKT2

95[1]

I/O

P2[7] — General purpose digital input/output pin.

I

RD2 — CAN2 receiver input. (LPC2378 only)

O

RTS1 — Request to Send output for UART1.

O

TRACEPKT2 — Trace Packet, bit 2.

P2[8]/TD2/

TXD2/

TRACEPKT3

93[1]

I/O

P2[8] — General purpose digital input/output pin.

O

TD2 — CAN2 transmitter output. (LPC2378 only)

O

TXD2 — Transmitter output for UART2.

O

TRACEPKT3 — Trace Packet, bit 3.

P2[9]/

USB_CONNECT1/

RXD2/

EXTIN0

92[1]

I/O

P2[9] — General purpose digital input/output pin.

O

USB_CONNECT1 — USB1 Soft Connect control. Signal used to switch an external

1.5 k

Ω resistor under the software control. Used with the SoftConnect USB feature.

(LPC2378 only)

I

RXD2 — Receiver input for UART2.

I

EXTIN0 — External Trigger Input.

P2[10]/EINT0

76[6]

I/O

P2[10] — General purpose digital input/output pin.

Note: LOW on this pin while RESET is LOW forces on-chip boot-loader to take over

control of the part after a reset.

I

EINT0 — External interrupt 0 input.

Table 3.

Pin description …continued

Symbol

Type

Description

Similar Part No. - LPC2377_10

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	LPC2377FBD144	258Kb / 55P	Single-chip 16-bit/32-bit microcontroller; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 04-19 November 2008
	LPC2377FBD144	351Kb / 69P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 6.1??6 October 2013
	LPC2377	351Kb / 69P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 6.1??6 October 2013

More results

Similar Description - LPC2377_10

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	LPC2378	253Kb / 54P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 01-6 December 2006
	LPC2377	351Kb / 69P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 6.1??6 October 2013
	LPC2387	1Mb / 47P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev.01.00-6 November 2007
	LPC2387	226Kb / 47P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 02-1 February 2008
	LPC2364	225Kb / 47P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 02-1 October 2007
	LPC2364	1Mb / 48P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 01-22 September 2006
	LPC2364	983Kb / 59P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 06-1 February 2010
	LPC2377	258Kb / 55P	Single-chip 16-bit/32-bit microcontroller; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 04-19 November 2008
	LPC2365FBD100	405Kb / 69P	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 7.1-16 October 2013
	LPC2364FET100	405Kb / 69P	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 7.1-16 October 2013

More results

LPC2377 Datasheet(PDF) 11 Page - NXP Semiconductors

LPC2377 Datasheet(HTML) 11 Page - NXP Semiconductors

Similar Part No. - LPC2377_10

Similar Description - LPC2377_10

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Datasheet Download

Link URL