Electronic Components Datasheet Search |
|
MAX5422EVKIT+ Datasheet(PDF) 3 Page - Maxim Integrated Products |
|
MAX5422EVKIT+ Datasheet(HTML) 3 Page - Maxim Integrated Products |
3 / 13 page MAX5422 Evaluation Kit _______________________________________________________________________________________ 3 3) Verify that shunts are correctly installed on the follow- ing jumpers and headers listed in the table below: 4) Connect the ohmmeter across the W and L PCB pads. 5) Connect the included USB cable from the PC to the MAX5422 EV kit. A Building Driver Database win- dow pops up in addition to a New Hardware Found message when installing the USB driver for the first time. If a window similar to the one described above does not appear after 30s, remove the USB cable from the board and recon- nect it. Administrator privileges are required to install the USB device driver on Windows 2000/XP/Vista. 6) Follow the directions of the Add New Hardware Wizard to install the USB device driver. Choose the Search for the best driver for your device option. Specify the location of the device driver to be C:\Program Files\MAX5422 (default installation directory) using the Browse button. During device driver installation, Windows may show a warning message indicating that the device driver Maxim uses does not contain a digital signature. This is not an error condition and it is safe to proceed with installation. Refer to the USB_Driver_Help.PDF doc- ument included with the software if there are prob- lems during this step. 7) Start the MAX5422 EV kit software by opening its icon in the Start | Programs menu. 8) Observe as the program automatically detects the USB connection and starts the main program. After successful connection, the EV kit software main window appears in the upper-left corner of the win- dow (Figure 1). 9) The MAX5422 EV kit is ready for additional testing. See the Detailed Description of Software section for more information on the software features. JUMPER SHUNT POSITION EV KIT FUNCTION JU1 1-2 EV kit powered by the 3.3V gener- ated from the USB interface circuit JU2 Install on one pin only H PCB pad is not connected to VDD or the W PCB pad JU3 Installed L PCB pad is connected to GND J1 (1-2) Installed Connects 3.3V from USB interface to MAX5422 J1 (3-4) Installed Connects VDD from MAX5422 to USB interface J1 (5-6) Installed Connects SCLK from USB interface to MAX5422 J1 (7-8) Installed Connects DIN from USB interface to MAX5422 J1 (9-10) Installed Connects CS from USB interface to MAX5422 J1 (11-12) Not installed Shunt not required J2 (1-2) J2 (3-4) J2 (5-6) J2 (7-8) J2 (9-10) Not installed Do not install shunts on these pins; shunts will short the power and signal lines to ground J2 (11-12) Not installed Shunt not required |
Similar Part No. - MAX5422EVKIT+ |
|
Similar Description - MAX5422EVKIT+ |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |