For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

10

10 - 5

Pin Number

Function

Description

interface schematic

1, 8

GND

Pins and exposed ground slug must be

connected to rF ground.

2

LO

This pin is AC coupled

and matched to 50 Ohms.

3, 4, 6

N/C

The pins are not connected internally; however, all data shown

herein was measured with these pins connected to rF/DC

ground externally.

5

iF

This pin is DC coupled. For applications not requiring opera-

tion to DC this port should be DC blocked externally using a

series capacitor whose value has been chosen to pass the

necessary iF frequency range. For operation to DC, this pin

must not source/sink more than 4mA of current or die non-

function and possible die failure will result.

7

rF

This pin is DC coupled

and matched to 50 Ohms.

Pin Descriptions

v00.0410

GaAs MMIC DOUBLE-BALANCED

HIGH IP3 MIXER, 9 - 15 GHz