ICS850S1601I

16:1, SINGLE-ENDED MULTIPLEXER

IDT™ / ICS™ 16:1, SINGLE-ENDED MULTIPLEXER

5

ICS850S1601BGI REV. A AUGUST 15, 2008

NOTE 1: Output terminated with 50

AC Electrical Characteristics

NOTE 2: Defined as skew between outputs on different devices operating at the same supply voltage and with equal load conditions.

Using the same type of inputs on each device, the outputs are measured at the differential cross points.

NOTE 3: This parameter is defined according with JEDEC Standard 65.

NOTE 4: Input duty cycle must be 50%.

Symbol

Parameter

Test Conditions

Minimum

Typical

Maximum

Units

Input

High Voltage

2

V

1.7

V

Input

Low Voltage

-0.3

0.8

V

-0.3

0.7

V

Input

High Current

CLK[0:15],

CLK_SEL[0:3]

150

µA

OE

10

µA

Input

Low Current

CLK[0:15],

CLK_SEL[0:3]

-10

µA

OE

-150

µA

Output High Voltage; NOTE 1

2.6

V

1.8

V

Output Low Voltage; NOTE 1

0.5

V

Parameter

Symbol

Test Conditions

Minimum

Typical

Maximum

Units

Output Frequency

250

MHz

Propagation Delay, Low-to-High;

NOTE 1

1.4

2.7

ns

tjit

Buffer Additive Phase Jitter, RMS;

refer to Additive Phase Jitter Section

155.52MHz, Integration

Range: 12kHz – 20MHz

0.35

ps

tsk(i)

Input Skew

175

ps

tsk(pp)

Part-to-Part Skew; NOTE 2, 3

600

ps

Output Rise/Fall Time

20% to 80%

100

500

ps

odc

Output Duty Cycle; NOTE 4

f

≤ 200MHz

46

54

%

f = 250MHz

40

60

%

155.52MHz

43

dB