 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
808012302 Datasheet(PDF) 9 Page - Magnetrol International, Inc. |
|
||||||||||||||||||||||||||||||
808012302 Datasheet(HTML) 9 Page - Magnetrol International, Inc. |
|
|
9 / 28 page  50-605 Kotron RF Point Model 80/81 Level Switches 6 2.5.3 Remote Mount with Rigid Probe 2.5.3.1 Main Amplifier Remote amplifier assemblies are normally shipped from the factory assembled into an “L” mounting bracket. Refer to Figure 8 while following instructions. 1. Remove amplifier from mounting bracket. 2. Install bracket in a location which will isolate unit from temperatures below -40° F (-40° C) and over +160° F (+71° C) or vibration/mechanical damage. Unit can be mounted up to 5000 feet (1500 meters) from probe assembly. Location should also offer easy access for wiring, calibration and maintenance. 3. Re-install amplifier onto mounting bracket. 4. Screw housing on mounting bracket until hand tight. Housing can be wrench tightened to align conduit connection with conduit. 2.5.3.2 Preamplifier 1. Thread probe into mounting bushing on tank. 2. Tighten securely being certain that the wrench is applied ONLY to the lower probe nut. Refer to Figure 8. 3. Screw the preamplifier housing onto the probe. Refer to Figure 8. 4. Screw housing on probe until hand tight. Housing can be wrench-tightened to align conduit connection with con- duit. Proceed to Section 2.7, Wiring on page 8. 2.5.4 Remote Mount with Flexible Probe 2.5.4.1 Main Amplifier Remote amplifier assemblies are normally shipped from the factory assembled into an “L” mounting bracket. Refer to Figure 8 while following instructions. 1. Remove amplifier from mounting bracket. 2. Install bracket in a location which will isolate unit from temperatures below -40° F (-40° C) and over +160° F (+71° C) or vibration/mechanical damage. Unit can be mounted up to 5000 feet (1500 meters) from probe assembly. Location should also offer easy access for wiring, calibration and maintenance. 3. Re-install amplifier onto mounting bracket. 4. Screw housing on mounting bracket until hand tight. Housing can be wrench-tightened to align conduit connection with conduit. Amplifier Housing Probe Terminal Power Wire Conduit Supplied By User Conduit Supplied By User Shielded Twisted Pair Mounting Bracket Probe Housing Packing Gland Nut Probe Connection Screw Rigid or Flexible Probe Figure 8 Side View Remote Mount Models with Rigid or Flexible Probe |
Similar Part No. - 808012302 |
|
Similar Description - 808012302 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.NET |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
