Electronic Components Datasheet Search |
|
NTS0102DP Datasheet(PDF) 6 Page - NXP Semiconductors |
|
NTS0102DP Datasheet(HTML) 6 Page - NXP Semiconductors |
6 / 27 page NTS0102 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 3 — 17 November 2011 6 of 27 NXP Semiconductors NTS0102 Dual supply translating transceiver; open drain; auto direction sensing [1] The minimum input and minimum output voltage ratings may be exceeded if the input and output current ratings are observed. [2] VCCO is the supply voltage associated with the output. [3] For TSSOP8 package: above 55 C the value of P tot derates linearly with 2.5 mW/K. For XSON8 and XSON8U packages: above 118 C the value of P tot derates linearly with 7.8 mW/K. For XQFN10 package: above 128 C the value of P tot derates linearly with 11.5 mW/K. For XQFN8 package: above 105.5 C the value of P tot derates linearly with 5.6 mW/K. 10. Recommended operating conditions [1] The A and B sides of an unused I/O pair must be held in the same state, both at VCCI or both at GND. [2] VCC(A) must be less than or equal to VCC(B). 11. Static characteristics IGND ground current 100 - mA Tstg storage temperature 65 +150 C Ptot total power dissipation Tamb = 40 C to +125 C [3] -250 mW Table 5. Limiting values …continued In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit Table 6. Recommended operating conditions[1][2] Symbol Parameter Conditions Min Max Unit VCC(A) supply voltage A 1.65 3.6 V VCC(B) supply voltage B 2.3 5.5 V Tamb ambient temperature 40 +125 C t/V input transition rise and fall rate A or B port; push-pull driving VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V - 10 ns/V OE input VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V - 10 ns/V Table 7. Typical static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V); Tamb = 25 C. Symbol Parameter Conditions Min Typ Max Unit II input leakage current OE input; VI = 0 V to 3.6 V; VCC(A) = 1.65Vto 3.6V; VCC(B) = 2.3 V to 5.5 V -- 1 A IOZ OFF-state output current A or B port; VO =0 V orVCCO; VCC(A) = 1.65 V to 3.6 V; VCC(B) = 2.3 V to 5.5 V [1] -- 1 A IOFF power-off leakage current A port; VI or VO = 0 V to 3.6 V; VCC(A) =0V; VCC(B) =0Vto5.5 V -- 1 A B port; VI or VO = 0 V to 5.5 V; VCC(B) =0V; VCC(A) =0Vto3.6 V -- 1 A CI input capacitance OE input; VCC(A) = 3.3 V; VCC(B) =3.3 V - 1 - pF |
Similar Part No. - NTS0102DP |
|
Similar Description - NTS0102DP |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |