epc111/112

Recommended Operating Conditions

Power Supply Voltage at pin VDD

-0.3V to +5.5V

Min.

Max.

Units

Voltage to any pin except VDD

-0.3V to VDD +0.3 V

Supply voltage at VDD (=VDD33)

3.0

3.6

V

Output current at any pin except LED

-6mA to +6mA

Supply voltage at VDD33 (=VDD)

3.0

3.6

V

Power Consumption with maximum load

125 mW

-40°

+85°

C

+260°C

Relative Humidity (non-condensing)

+5

+95

%

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended operating conditions

indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specific -

ations and test conditions, see Electrical Characteristics.

Note 2: This device is a highly sensitive CMOS ac current amplifier with an ESD rating of JEDEC HBM class 0 (<250V). Handling and

assembly of this device should only be done at ESD protected workstations.

Electrical Characteristics

General Data

Symbol

Parameter

Conditions/Comments

Values

Units

Min.

Typ.

Max.

Power supply voltage

at VDD and VDD33

3.0

3.3

3.6

Power-up Threshold Voltage

Voltage at VDD33 when the device starts up

2.4

3

V

Ripple on supply voltage,

peak to peak

Type

epc111

60nA

250

mV

epc112

108nA

600

mV

Current consumption

2

mA

Output high voltage OUTN

V

Output low voltage OUTN

@ 4mA source

0.5

V

Output high voltage OUTH

see Figure 6

Output low voltage OUTH

@ 3mA source. See Figure 6.

0.5

V

Output high voltage

V

Output low voltage

0.5

V

Source current maximum

@ Pin LED

0.7

mA

Reference clock

of internal oscillator - for information only

1

MHz

Temperature drift

of the oscillator - for information only

640

ppm/K

© 2011 ESPROS Photonics Corporation

Characteristics subject to change without notice

2

Datasheet epc111_112 - V2.2

www.espros.ch