MCM6226BB

8

MOTOROLA FAST SRAM

32 LEAD

300 MIL SOJ

CASE 857–02

S

S

B

0.25 (0.010)

S

S

A

0.17 (0.007)

G

L

K

–A–

–X–

1

16

17

32

M

F

D

P

-B-

E

C

R

S

NOTE 3

NOTE 4

NOTE 5

NOTE 5

RADIUS

32 PL

32 PL

DETAIL Z

0.10 (0.004)

SEATING

PLANE

-T-

MIN

MIN

MAX

MAX

MILLIMETERS

INCHES

DIM

A

B

C

D

E

F

G

K

L

N

P

R

S

20.83

7.50

3.26

0.41

2.24

0.67

0.89

0.76

8.38

6.60

0.77

21.08

7.74

3.75

0.50

2.48

0.81

1.14

1.14

8.64

6.86

1.01

0.820

0.295

0.128

0.016

0.088

0.026

0.035

0.030

0.330

0.260

0.030

0.830

0.305

0.148

0.020

0.098

0.032

0.045

0.045

0.340

0.270

0.040

1.27 BSC

0.64 BSC

0.050 BSC

0.025 BSC

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. DATUM PLANE -X- LOCATED AT TOP OF MOLD

PARTING LINE AND COINCIDENT WITH TOP OF

LEAD, WHERE LEAD EXITS BODY.

4. TO BE DETERMINED AT PLANE -X-.

5. TO BE DETERMINED AT PLANE -T-.

6. DIMENSION A & B DO NOT INCLUDE MOLD

PROTRUSION. MOLD PROTRUSION SHALL NOT

EXCEED 0.15 (0.006) PER SIDE.

7. 857-01 IS OBSOLETE, NEW STANDARD 857-02.

S

S

A

0.17 (0.007)

S

S

B

0.17 (0.007)

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and

specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola

data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”

must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of

others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other

applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury

or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees

arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that

Motorola was negligent regarding the design or manufacture of the part. Motorola and

are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal

Opportunity/Affirmative Action Employer.

Mfax is a trademark of Motorola, Inc.

How to reach us:

USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;

JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1,

P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447

Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488

Mfax

™: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609

ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,

– US & Canada ONLY 1–800–774–1848

51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

INTERNET: http://motorola.com/sps

MCM6226BB/D

◊