TPS82690

TPS82695

TPS82697

SLVSA66B

– JUNE 2011 – REVISED FEBRUARY 2012

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

PART

OUTPUT

DEVICE

PACKAGE

NUMBER

SPECIFIC FEATURE

MARKING

TPS82695

2.5V

TPS82695SIP

UF

2.85V

TPS82690SIP

RC

-40

°C to 85°C

2.9V

TPS82696SIP

2.8V

TPS82697SIP

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com.

(2)

Internal tap points are available to facilitate output voltages in 25mV increments.

(3)

The SIP package is available in tape and reel. Add a R suffix (e.g. TPS82690SIPR) to order quantities of 3000 parts. Add a T suffix (e.g.

TPS82690SIPT) to order quantities of 250 parts.

(4)

Product preview. Contact TI factory for more information

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range (unless otherwise noted)

(1)

UNIT

–0.3 V to 6 V

–0.3 V to 3.6 V

Peak output current

500 mA

Power dissipation

Internally limited

–40°C to 85°C

Maximum internal operating temperature

125

°C

Storage temperature range

–55°C to 125°C

Human body model

2 kV

Charge device model

1 kV

Machine model

200 V

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

Operation above 4.35V input voltage for extended periods may affect device reliability. See input capacitor selection section for more

details.

(3)

All voltage values are with respect to network ground terminal.

(4)

In applications where high power dissipation and/or poor package thermal resistance is present, the maximum ambient temperature may

in the application (

recommended to operate the device with a maximum internal temperature of 105

°C.

(5)

The human body model is a 100-pF capacitor discharged through a 1.5-k

Ω resistor into each pin. The machine model is a 200-pF

capacitor discharged directly into each pin.

2

Copyright

© 2011–2012, Texas Instruments Incorporated