Electronic Components Datasheet Search |
|
EN25Q128-104BBIP Datasheet(PDF) 1 Page - Eon Silicon Solution Inc. |
|
EN25Q128-104BBIP Datasheet(HTML) 1 Page - Eon Silicon Solution Inc. |
1 / 57 page This Data Sheet may be revised by subsequent versions ©2004 Eon Silicon Solution, Inc., www.eonssi.com or modifications due to changes in technical specifications. 1 EN25Q128 Rev. J, Issue Date: 2011/09/19 FEATURES • Single power supply operation - Full voltage range: 2.7-3.6 volt • Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3 • 128 M-bit Serial Flash - 128 M-bit/16,384 K-byte/65,536 pages - 256 bytes per programmable page • Standard, Dual or Quad SPI - Standard SPI: CLK, CS#, DI, DO, WP# - Dual SPI: CLK, CS#, DQ0, DQ1, WP# - Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3 • High performance - 104MHz clock rate for Standard SPI - 80MHz clock rate for two data bits - 50MHz clock rate for four data bits • Low power consumption - 12 mA typical active current - 1 μA typical power down current • Uniform Sector Architecture: - 4096 sectors of 4-Kbyte - 256 blocks of 64-Kbyte - Any sector or block can be erased individually • Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin • High performance program/erase speed - Page program time: 0.8ms typical - Sector erase time: 50ms typical - Block erase time 200ms typical - Chip erase time: 45 seconds typical • Lockable 512 byte OTP security sector • Minimum 100K endurance cycle • Package Options - 8 contact VDFN (5x6mm) - 8 contact VDFN (6x8mm) - 16 pins SOP 300mil body width - 24 balls TFBGA (6x8mm) - All Pb-free packages are RoHS compliant • Industrial and Automotive temperature Range GENERAL DESCRIPTION The EN25Q128 is a 128 Megabit (16,384K-byte) Serial Flash memory, with advanced write protection mechanisms. The EN25Q128 supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output as well as Dual/Quad I/O using SPI pins: Serial Clock, Chip Select, Serial DQ0(DI), DQ1(DO), DQ2(WP#) and DQ3(NC). SPI clock frequencies of up to 80MHz are supported allowing equivalent clock rates of 160MHz (80MHz x 2) for Dual Output when using the Dual Output Fast Read instructions, and SPI clock frequencies of up to 50MHz are supported allowing equivalent clock rates of 200MHz (50MHz x 4) for Quad Output when using the Quad Output Fast Read instructions. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The EN25Q128 is designed to allow either single Sector/Block at a time or full chip erase operation. The EN25Q128 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block. EN25Q128 128 Megabit Serial Flash Memory with 4Kbyte Uniform Sector |
Similar Part No. - EN25Q128-104BBIP |
|
Similar Description - EN25Q128-104BBIP |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |