Panel Mount Power Supply

Technical Information

PMC-24V035W1AA

8/13

Rev: 01,

2/11/2011

 Over Load Protection

The Power Supply is provided with an overload protection (OLP/OCP) function which protects the power

supply from possible damage by over current. Additionally power supply also has over temperature

protection (OTP) in case the over load condition persists for a longer duration and is below the overload

trigger point but > 100% load.

power supply reaches max power limit and will run into bouncing mode when the output reaches UVLO

(under voltage point). The output voltage will recover automatically when the overload condition is

removed.

 Short Circuit Protection

The Power Supply also has a short circuit protection which is in line with the overload protection and

activates whenever there is a short across the output voltage, output goes in bouncing mode and

remains until the fault is removed.

 Over Temperature Protection

Additionally power supply also has over temperature protection (OTP) as mentioned above this OTP

comes into picture when the over load condition persists for a longer duration and the output current level

is below the overload trigger point but > 100% load.

Also in the event of a higher ambient operating condition with 100% load the power supply will run into

OTP when the Ambient temperature is > 55°C. The protection is self recoverable when activated output

voltage bounces until the operating ambient temperature of the power supply is reduced or the power

supply is used within its power derating curve.