Panel Mount Power Supply

Technical Information

PMC-DSPV100W1A

2/13

Rev: 00.1,

3/14/2011

Technical Data

PMC-DSPV100W1A

1.) Input Data

Nominal AC Input Voltage

100 - 240VAC

Input Voltage range

85 - 264VAC

Nominal AC Input Frequency

50Hz

AC Input Frequency

47 - 63Hz

DC Input Voltage Range

120 – 375VDC

Max. Input Current

3.2A Max.(2.0A @ 115VAC, 1.1A @ 230VAC)

Efficiency

> 86% @ 230VAC, > 84% @ 115VAC

Max. Inrush current limitation.(Cold Start)

< 50A @ 115VAC, < 100A @ 230VAC

Leakage Current

< 1.0mA @ 240VAC

Transient surge voltage protection

VARISTOR

Input fuse, internal (device protection)

T 3.15.AH / 250V

Recommended backup fuse: Power circuit-breaker characteristic

6A,10A,16A : B

2.) Output Data (24VDC)

Max. Output Power

65W

Nominal Output Voltage

24 VDC

Tolerance

+/- 2% (Initial Set Point tolerance)

Output Voltage Adjust Range

22.8 – 26.4 VDC

Nominal Output Current

2.7 A

Line Regulation

+/- 0.5% Typical @ 85 to 264VAC input, 100% load

Load Regulation

+/- 1.0% Typical @ rated input, 20% to 100% load

Startup with capacitive loads

Max 4,000µF (@ Nominal Input Voltage & Nominal O/P Voltage,25°C)

Total PARD (Peak switching 20MHz BW @ nominal values)

< 200mVpp.

Power Derating above +50°C ambient Temp.

Derated Linearly 2.5% / °C

Rise Time

< 30 ms @ full load, 25°C

Start-Up Time

< 1.0 s @ full load, 25°C

Main Buffering (Hold-Up Time ,Power failure bypass)

> 15ms @ 115VAC & 230Vac, 25°C

Dynamic Response (Overshoot & Undershoot O/P Voltage)

+/-5% of 0% - 100% load.

Parallel connection (Redundancy)

YES ,with External Diode or Redundancy module (DRR-20A or DRR-40A)

Surge voltage protection against internal surge voltages

YES

3.) Protection (24VDC)

Over Voltage Protection

> 32.4V, SELV output, Non-Latching (Auto recovery).

Over load Protection

> 150% of rated load current, Auto Recovery (Hicc-up Mode).

Over current Protection

> 150% of rated load current, Auto Recovery (Hicc-up Mode).

Over Temperature Protection

> 50°C Ambient Temp @ Max Load. Non-Latching (Auto-recovery.

Short Circuit Protection

Bouncing mode and recovers automatically when the fault is removed.

4.) Output Data (5VDC)

Max. Output Power

35W

Nominal Output Voltage

5 VDC

Tolerance

+/- 5% (Initial Set Point tolerance)

Output Voltage Adjust Range

11.4 – 12.6 VDC

Nominal Output Current

7.0 A

Line Regulation

+/- 0.5% Typical @ 85 to 264VAC input, 100% load

Load Regulation

+/- 1.0% Typical @ rated input, 20% to 100% load

Total PARD (Peak switching 20MHz BW @ nominal values)

< 80mVpp.

Power Derating above +50°C ambient Temp.

Derated Linearly 2.5% / °C

Rise Time

< 20 ms @ full load, 25°C

Start-Up Time

< 1.0 s @ full load, 25°C

Main Buffering (Hold-Up Time ,Power failure bypass)

> 15ms @ 115VAC & 230Vac, 25°C

Dynamic Response (Overshoot & Undershoot O/P Voltage)

+/-5% of 0% - 100% load.

Surge voltage protection against internal surge voltages

YES

5.) Protection (5VDC)

Over Voltage Protection

> 6.75V, SELV output, Non-Latching (Auto recovery).

Over load Protection

> 150% of rated load current, Auto Recovery (Hicc-up Mode).

Over current Protection

> 150% of rated load current, Auto Recovery (Hicc-up Mode).

Over Temperature Protection

> 50°C Ambient Temp @ Max Load. Non-Latching (Auto-recovery.

Short Circuit Protection

Bouncing mode and recovers automatically when the fault is removed.