www.ti.com

Absolute Maximum Ratings

(1)

Recommended Operating Conditions

(1)

SN74LVTH162373-EP

3.3-V ABT 16-BIT TRANSPARENT D-TYPE LATCH

WITH 3-STATE OUTPUTS

SCBS811A – JULY 2006 – REVISED JULY 2006

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

Supply voltage range

–0.5

4.6

V

–0.5

7

V

–0.5

7

V

–0.5

V

Current into any output in the low state

30

mA

30

mA

Input clamp current

–50

mA

Output clamp current

–50

mA

θ

JA

63

°C/W

–65

150

°C

(1)

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

(3)

(4)

The package thermal impedance is calculated in accordance with JESD 51-7.

(5)

Long-term high-temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of

overall device life. See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging.

MIN

MAX

UNIT

Supply voltage

2.7

3.6

V

High-level input voltage

2

V

Low-level input voltage

0.8

V

Input voltage

5.5

V

High-level output current

–12

mA

Low-level output current

12

mA

∆t/∆v

Input transition rise or fall rate

Outputs enabled

10

ns/V

∆t/∆V

CC

Power-up ramp rate

200

µs/V

Operating free-air temperature

–55

125

°C

(1)

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

3

Submit Documentation Feedback