Electronic Components Datasheet Search |
|
TAJA106K010R Datasheet(PDF) 4 Page - Analog Devices |
|
TAJA106K010R Datasheet(HTML) 4 Page - Analog Devices |
4 / 12 page UG-272 Evaluation Board User Guide Rev. A | Page 4 of 12 RUNNING THE SOFTWARE To run the evaluation board program, do the following: 1. Click Start/All Programs/Analog Devices/AD9833/ AD9833 Eval Board. 2. If the SDP board is not connected to the USB port when the software is launched, a connectivity error displays (see Figure 3). Simply connect the evaluation board to the USB port of the PC, wait a few seconds, click Rescan, and follow the instructions. 3. Ensure that all links are in their correct locations (see Table 1). The main window of the AD9833DBZ evaluation software then opens, as shown in Figure 4. Table 1. Default Setup for Link Positions Link No. Position Function LK1 Out Decouple the CAP/2.5V pin to ground because VDD is >2.7 V. LK2 A On-board linear regulator selected to supply power to the general oscillator. LK4 A 3.3 V digital supply for the AD9833 supplied from the EVAL-SDP-CB1Z SDP board. Figure 3. Pop-Up Window Error |
Similar Part No. - TAJA106K010R |
|
Similar Description - TAJA106K010R |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |