J6

J12

PCB

www.ti.com

1.2

Connectors

1.2.1

Power Connectors

The DRV88xx Customer EVM offers access to VM (Motor Voltage) power rail via a terminal block (J6) and

header pins (J7). A set of test clips at the top of the board in parallel with the terminal block allows for the

monitoring of the input power rail. The polarity of the terminal connections are mentioned in the silkscreen.

User must power the EVM using the correct polarity. User must apply VM according to datasheet

recommended parameters.

Figure 3. Power Connectors

6

SLVU574A – September 2011 – Revised June 2012

Submit Documentation Feedback

Copyright © 2011–2012, Texas Instruments Incorporated