UCC3912PWPTRG4 datasheet(7/16 Pages) TI1

Part #	UCC3912PWPTRG4

Description	PROGRAMMABLE HOT SWAP POWER MANAGER

Download	16 Pages

Scroll/Zoom	100%

Manufacturer	TI1 [Texas Instruments]

Direct Link	http://www.ti.com

Logo

7 / 16 page

UCC2912

UCC3912

PROGRAMMABLE HOT SWAP POWER MANAGER

SLUS241D − MARCH 1994 - REVISED NOVEMBER 2003

7

www.ti.com

APPLICATION INFORMATION

For a resistive load of value RL, the value of COUT(max) can be estimated from:

C

OUT(max) [

28

103

CT

RL

n

1

1*

V

OUT

I

MAX

RL

The overcurrent comparator senses both the DAC output and a representation of the output current. When the

output current exceeds the programmed level the timing capacitor CT charges with 36 µA of current. If the fault

occurs for the time it takes for CT to charge up to 1.5 V, the fault latch is set and the output switch is opened.

The output remains opened until CT discharges to 0.5 V with a 1.2-µA current source. Once the 0.5 V is reached

the output is enabled and will either appear as a switch, if the fault is removed, or a current source if the fault

remains. If the over current condition is still present, then CT will begin charging, starting the cycle over, resulting

in approximately a 3% on time.

UDG-94019-1

Figure 3. UCC3912 On-Time Circuitry

Similar Part No. - UCC3912PWPTRG4

Manufacturer	Part #	Datasheet	Description
Texas Instruments	UCC3912PWPTRG4	148Kb / 6P	[Old version datasheet] Programmable Hot Swap Power Manager

Manufacturer	Part #	Datasheet	Description
Texas Instruments	UCC3912	148Kb / 6P	[Old version datasheet] Programmable Hot Swap Power Manager
	UCC2915	67Kb / 5P	[Old version datasheet] 15V Programmable Hot Swap Power Manager
	UCC39151	203Kb / 6P	[Old version datasheet] 15V Programmable Hot Swap Power Manager
	UCC3915DP	663Kb / 15P	[Old version datasheet] 15-V PROGRAMMABLE HOT SWAP POWER MANAGER
	TPS2345	480Kb / 30P	[Old version datasheet] CompactPCI짰 HOT SWAP POWER MANAGER
	UCC2913	314Kb / 17P	[Old version datasheet] NEGATIVE VOLTAGE HOT SWAP POWER MANAGER
	UCC3917D	1Mb / 25P	[Old version datasheet] Positive Floating Hot-Swap Power Manager
	TPS2306	407Kb / 28P	[Old version datasheet] DUAL SEQUENCING HOT SWAP POWER MANAGER
	UCC1913	123Kb / 9P	[Old version datasheet] Negative Voltage Hot Swap Power Manager
	UCC1917	228Kb / 9P	[Old version datasheet] Positive Floating Hot Swap Power Manager