Electronic Components Datasheet Search |
|
TDA7478 Datasheet(PDF) 8 Page - STMicroelectronics |
|
TDA7478 Datasheet(HTML) 8 Page - STMicroelectronics |
8 / 11 page Oscillator controls (FSEL, OSEL) TDA7478 8/11 Doc 10679 Rev 3 4 Oscillator controls (FSEL, OSEL) Two different crystal frequencies can be used. The adaption of the internal clock divider to the external crystal is achieved via the input pin FSEL. See the following table for reference. A special mode is introduced to reduce EMI. With pin OSEL connected to GND the internal oscillator is switched off and an external sinusoidal frequency could be applied on OSCIN. The peak to peak voltage of this signal can be reduced down to 60 mV. In this mode the frequency selection via FSEL is still active. Suggested values of C1 and C2 are shown in the following table. Table 6. Crystal frequencies Crystal FSEL (pin configuration) 4.332MHz 8.664MHz connected to GND or open connected to Vs Table 7. C1 and C2 suggested value Crystal C1 C2 4.332MHz 8.664MHz 27pF 27pF 47pF - |
Similar Part No. - TDA7478_11 |
|
Similar Description - TDA7478_11 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |