Specifications subject to change without notice. Dimensions (mm). See Appendix A for

recommended power cord. See PDI full line catalog for detailed specifications on power cords.

IEC 60320 INLET SOCKET WITH SWITCH, SINGLE AND DOUBLE FUSE HOLDER,

FLANGE MOUNT

HGN-375

MECHANICAL DIMENSIONS

FEATURES

The HGN-375 protects electronic equipment from common

and differential mode line interference in the range of

10KHz up to 30MHz. This “combi-unit” is equipped with

IEC connector, fuse holder for one or two 5 x 20 mm fuses,

2 pole on/off switch and fully enclosed metal housing.

These filters are also available for Medical equipment

with low leakage current. HGN-375 series filters are high

performance filters and have been designed to bring various

medical equipments into compliance with EN55011 and

FCC Part 15J, Class B conducted emissions limits.

APPLICATIONS

Computer & networking equipment, Measuring & control

equipment, Data processing equipment, laboratory instruments,

Switching power supplies, other electronic equipment.

TECHNICAL DATA

Line to Ground:

@ 250VAC 50Hz: 0.5mA, max

Line to Ground: 2250VDC

Line to Line: 1450VDC

* Medical application

(Unit: mm)

60.5

0.8 TYP.

52.0

33.5

67.0

40.0+--0.2

O

Use only with a 250V Fuse

Employer uniqement avec

un fusible de 250V

28.5

6.30 TYP.

57.5

45.0

6.0

4x R0.5

2x M3

40.0+--0.2

61.5

29.5

79

145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076

e-mail: filtersales@powerdynamics.com •

www.powerdynamics.com