Electronic Components Datasheet Search |
|
ADG333A Datasheet(PDF) 8 Page - Analog Devices |
|
ADG333A Datasheet(HTML) 8 Page - Analog Devices |
8 / 8 page ADG333A REV. 0 –8– APPLICATIONS INFORMATION ADG333A Supply Voltages The ADG333A can operate off a dual or signal supply. VSS should be connected to GND when operating with a single supply. When using a dual supply the ADG333A can also oper- ate with unbalanced supplies, for example VDD = 20 V and VSS = –5 V. The only restrictions are that VDD to GND must not exceed 30 V, VSS to GND must not drop below –30 V and VDD to VSS must not exceed +44 V. It is important to remember that the ADG333A supply voltage directly affects the input signal range, the switch ON resistance and the switching times of the part. The effects of the power supplies on these characteristics can be clearly seen from the characteristic curves in this data sheet. Power Supply Sequencing When using CMOS devices care must be taken to ensure correct power-supply sequencing. Incorrect power-supply sequencing can result in the device being subjected to stresses beyond those maximum ratings listed in the data sheet. This is also true for the ADG333A. Always sequence VDD on first followed by VSS and the logic signals. An external signal within the maximum specified ratings can then be safely presented to the source or drain of the switch OUTLINE DIMENSIONS Dimensions shown in inches and (mm). 20-Pin Plastic DIP (N-20) 20 110 11 1.060 (26.90) 0.925 (23.50) 0.280 (7.11) 0.240 (6.10) PIN 1 SEATING PLANE 0.022 (0.558) 0.014 (0.356) 0.060 (1.52) 0.015 (0.38) 0.210 (5.33) MAX 0.130 (3.30) MIN 0.070 (1.77) 0.045 (1.15) 0.100 (2.54) BSC 0.160 (4.06) 0.115 (2.93) 0.325 (8.25) 0.300 (7.62) 0.015 (0.381) 0.008 (0.204) 0.195 (4.95) 0.115 (2.93) 20-Pin SOIC (R-20) SEATING PLANE 0.0118 (0.30) 0.0040 (0.10) 0.0192 (0.49) 0.0138 (0.35) 0.1043 (2.65) 0.0926 (2.35) 0.0500 (1.27) BSC 0.0125 (0.32) 0.0091 (0.23) 0.0500 (1.27) 0.0157 (0.40) 8 ° 0 ° 0.0291 (0.74) 0.0098 (0.25) x 45 ° 20 11 10 1 0.5118 (13.00) 0.4961 (12.60) PIN 1 20-Pin SSOP (RS-20) 20 11 10 1 0.295 (7.50) 0.271 (6.90) PIN 1 SEATING PLANE 0.008 (0.203) 0.002 (0.050) 0.07 (1.78) 0.066 (1.67) 0.0256 (0.65) BSC 0.078 (1.98) 0.068 (1.73) 0.009 (0.229) 0.005 (0.127) 0.037 (0.94) 0.022 (0.559) 8 ° 0 ° LEADS WILL BE EITHER TIN PLATED OR SOLDIER DIPPED IN ACCORDANCE WITH MIL-M-38510 REQUIREMENTS |
Similar Part No. - ADG333A |
|
Similar Description - ADG333A |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |