technical data

Dimensions in mm (typical)

Not to scale

technical characteristics

Series

Max. Power

Dissipation

Max. Reverse

Voltage

Panel Cutout

Nut Mounting

Torque

Min. Mounting

Centres

Max. Panel

Thickness

units

mW

Vdc

mm

Nm

mm

mm

to order

Mounting hole to be clean and burr free

* = Current Version

^ = Voltage Version

BS EN ISO 9001:2008

approved manufacturer

665 series

7.8

10.6

150

5

8.5

MOUNTING HOLE

RED LEAD +VE

FLYING

LEADS

FLYING

LEADS

BLACK LEAD -VE

WIRE

SUPPORT

BOOT

NUT

TOOTHLOCK

WASHER

PANEL

SEAL

BODY

LENS

HEXAGON TO SUIT

M6 SOCKET (10mm A/F)

Anode termination denoted by red indicator

housing material

Body

Nut

Panel Seal

Fresnel Lens

Encapsulation

Lock Washer

Termination Tags

Header

Header

Header

Hard, black anodised Aluminium. Anodised to Defence Standard 03/26 50 microns

Bright Nickel Plated Brass

PTFE

Polycarbonate

PC5430 Resin

Spring Steel

Defence Standard 61/12, Part 18 chemical & flame retardent

-

665

75

3*

8.5

1.0

14.5

1.5 - 5.0

© marl international limited technical documentation has been designed by marl international limited for the intention of

providing information, which must not be copied or released to a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

marl international limited - dsn 665 - version 2012-12-06-113949

page 2 of 4