MSKW2000 SERIES

DC/DC CONVERTER 5W, SMD-Package

E-mail:sales@minmax.com.tw

Tel:886-6-2923150

2012/01/10 REV:6

Page 3 of 5

Environmental Specifications

Parameter

Conditions

Min.

Max.

Unit

Operating Temperature Range (with Derating)

Ambient

-40

+85

℃

Case Temperature

---

+90

℃

Storage Temperature Range

-50

+125

℃

Humidity (non condensing)

---

95

% rel. H

Cooling

Free-Air convection

Lead Temperature (1.5mm from case for 10Sec.)

---

260

℃

Power Derating Curve

Notes

1

Specifications typical at Ta=+25

℃, resistive load, nominal input voltage and rated output current unless otherwise noted.

2

Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%

3

Ripple & Noise measurement bandwidth is 0-20MHz.

4

These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these

modules; however they may not meet all specifications listed.

5

All DC/DC converters should be externally fused at the front end for protection.

6

Other input and output voltage may be available, please contact factory.

7

That “natural convection” is about 20LFM but is not equal to still air (0 LFM).

8

Specifications subject to change without notice.

Package Specifications

Mechanical Dimensions

Connecting Pin Patterns

►

All dimensions in mm (inches)

►

Tolerance: X.X±0.25 (X.XX±0.01)

X.XX±0.13 ( X.XXX±0.005)

►

Pins ±0.05 (±0.002)

2.76

5.08

15.24 [0.6]

[0.2]

7.62

[0.3]

33.4 [1.31]

1.50 [0.06]

1

24

2

23

3

22

10

15

11

14

12

13

16

9

0.15 S

SSEATING

PLANE

[0.11]

3.0 [0.12]

27.94 [1.10]

2.54 [0.10]

15.24 [0.60]

1.9 [0.07]

27.0 [1.06]