Electronic Components Datasheet Search |
|
CT1496-2 Datasheet(PDF) 4 Page - Aeroflex Circuit Technology |
|
CT1496-2 Datasheet(HTML) 4 Page - Aeroflex Circuit Technology |
4 / 9 page Aeroflex Circuit Technology SCDCT1496 REV A 3/22/00 Plainview NY (516) 694-6700 4 Sync Bit, WI Bit, 4 Bit SIS/ SOS Input & 32 Bit Parallel Word Input IIH Logic High Input Current 20µA max @ VIH = 2.5V IIL Logic Low Input Current 3/ -400µA max @ VIL = 0.5V DC Supply Currents ICC VCC = +5.5V (pin 31), all other pins at GND 590mA max Notes: 1/ and 2/ The total loads on these outputpairs (1 & 2) must be matched to within 15pF in order to maintain signal skews between the lines of < 5nSec maximum. 3/ Current out of a terminal is given as a negative value. 4/ Maximum total capacitance loads allowable on these pins are: AC Electrical Characteristics (VCC = 5V ±10%, TC = -55 °C to +100°C, See Figure 1, unless otherwise specified) Symbol Parameter / Condition Min Max Unit T1 Stable input data setup time prior to Sys Clr/ Load rising edge 40 - ns T2 Stable input data hold time after Sys Clr/ Load rising edge 20 - ns PW1 Sys Clr/ Load pulsewidth 50 - ns T3 Sys Clr/ Load disable to Encoder Enable pulse 40 - ns PW2 Encoder Enable pulsewidth 100 400 ns T4 Encoder Enable rising edge to TX Inhibit disable (thruput delay) 30 140 ns T5 Transmit/ Self Test selection to TX Inhibit disable set-up time 50 - ns T6 TX Inhibit disable to output data delay (Transmit/ Self Test = high) - 10 ns T7 DATA Output to DATA output delay {ZLOAD (DATA) = ZLOAD (DATA), CLOAD < 40pF} - 5 ns PW3 DATA and DATA output half-bit pulsewidth 47 53 ns PW4 DATA and DATA output bit pulsewidth 97 103 ns T8 TX Inhibit disable to output DATAST delay - 10 ns T9 DATAST output DATAST output delay {ZLOAD (DATAST) = ZLOAD (DATAST), CLOAD < 50pF} - 5 ns PW5 DATAST and DATAST output half-bit pulsewidth 47 53 ns PW6 DATAST and DATAST output bit pulsewidth 97 103 ns T10 End of output DATA, DATA, DATAst or DATAst to TX Inhibit enable - 10 ns T11 TX Inhibit enable to next Transmit/ Self Test selection 50 - ns DC Electrical Characteristics (con’t) (VDD = 5V ±10%, TC = -55 °C to +100°C, unless otherwise specified) SYMBOL PARAMETER LIMIT DATA, DATA 40 pF max TX INHIBIT 45 pF max DATAst & DATAst 50 pF max |
Similar Part No. - CT1496-2 |
|
Similar Description - CT1496-2 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |