LTT Series

Torque, Angle & Force Analyzer

with ARCII Technology

TorqueLab

LTT

01.3

Torque

Analyzers

Recommended for all hand screwdrivers, wrenches, or power tools.

KEY FEATURES

Features a built-in transducer and can connect to an external transducer.

LTT10i

LTT25i

LTT50i

LTT100i

LTT250i

LTT50F

LTT100F

LTT250F

Torque Ranges

Item #

11.3 - 113 cN.m

28.25 - 282.5 cN.m

56.5 - 565 cN.m

113 - 1130 cN.m

282.5 - 2825 cN.m

6.8 - 67.8 N.m

13.56 - 135.6 N.m

33.9 - 339 N.m

S.I.

1 - 10 lbf.in

2.5 - 25 lbf.in

5 - 50 lbf.in

10 - 100 lbf.in

25 - 250 lbf.in

5 - 50 lbf.ft

10 - 100 lbf.ft

25 - 250 lbf.ft

American

Model

068400

068401

068402

068403

068404

068405

068406

068407

1.2 - 11.5 kgf.cm

2.9 - 28.8 kgf.cm

5.8 - 57.6 kgf.cm

11.5 - 115 kgf.cm

28.8 - 288 kgf.cm

0.7 - 6.9 kgf.m

1.4 - 13.8 kgf.m

3.5 - 34.5 kgf.m

1/4" F/Sq

1/4" F/Sq

1/4" F/Sq

1/4" F/Sq

1/4" F/Sq

3/8" F/Sq

1/2" F/Sq

1/2" F/Sq

Drive Size

8 lbs.

8 lbs.

8 lbs.

8 lbs.

8 lbs.

8 lbs.

8 lbs.

8 lbs.

Wt.

Metric

NOTE!

Since a tester cannot always duplicate actual joint

characteristic, the torque reading displayed on the LTT may

vary from the actual torque that a tool will apply to a joint.

When critical assemblies are involved, the torque output of the

power tool being used should be verified on the actual

assembly using a calibrated measuring torque tool.

ACCESSORIES INCLUDED

Universal Charger (100 - 240VAC)

USB Cable

Mountz Software Programs

Run Down Adapter

Case

Selection of six operation modes:

Track, Peak, First Peak, Audit, Spindle Audit, and Torque + Angle

Seven units of torque measurements:

ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm

Two units of force measurement: lbf and kN

Features built-in Tool Tests operation.

Includes three PC Windows based software programs:

Mountz Torque Meter Interface Program

for sensor calibrations, meter calibration and tool tests.

Torque Meter Bootloader

for updating the LTT operating systems.

Excel Add-In

for Real-Time data collection into an Excel spreadsheet.

It provides statistics calculations.

Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz

Six-digit display and easy to read menu structure.

Real Time Clock for time stamping of readings.

USB interface to download readings to PC.

High Capacity Li-ion Batteries for long life (30 hours with standard

transducers and 16 hours with brushless rotary).

Can connect to most mv/v transducers and can store calibration data for

up to 50 non-smart torque sensors.

The 5VDC capability allows unit to be used with a Brushless Rotary

Transducer for testing pulse tools and high RPM tools.

Features Go / No Go LEDs that illuminate when high or low setting is

achieved.

Real time graph of torque vs. time using associated PC Windows software.

Stores a total of 5000 data points.

Torque and Angle data is displayed simultaneously when used with Torque

and Angle transducers, up to 8000 RPM for angle measurement.

Transducer

RTSX-A

All BLRTSX models

BMX

LPX

SDX

RTSX

ETX

CABLE CHART

072000

072001

072002

072003

072004

072005

072006

Cable

Item #

Accuracy

0.5% of reading from 20% to 100% of full scale.

Accuracy

1% of reading from 10% to 20% of full scale.

Provides EZ-Plug & Play with Mountz Transducers, Features ARCII

technology, an instant auto-recognition system of the transducer connected

to the LTT.

Flash memory allows upgrades to be done by the user in the field &

internet through the USB port.

Item #

770300

770319

072506

072998

072997

ACCESSORIES

OPTIONAL

Charger 100 - 240VAC

USB Cable

Battery Pack

Multiplexer

Bar Code Reader

Description

Mounting Bracket

(for LTT model 10i-50F)

072608

Mounting Bracket

(for all other LTT models)

072606

PLC Interface

072014

PLUG & PLAY

Supplied with NIST-Traceable Certification of Calibration

CERTIFIED